; generated by Slic3r 1.1.7 on 2016-02-18 at 00:10:17

; perimeters extrusion width = 0.32mm
; infill extrusion width = 0.33mm
; solid infill extrusion width = 0.29mm
; top infill extrusion width = 0.70mm

G21 ; set units to millimeters
M107 ; disable fan
M190 S105 ; wait for bed temperature to be reached
M104 S250 ; set temperature
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle

M109 S250 ; wait for temperature to be reached
G90 ; use absolute coordinates
G92 E0 ; reset extrusion distance
M82 ; use absolute distances for extrusion
G1 F1800.000 E-1.00000 ; retract
G92 E0 ; reset extrusion distance
G1 Z0.300 F4800.000 ; move to next layer (0)
G1 X86.912 Y86.587 F4800.000 ; move to first skirt point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X88.562 Y85.628 E1.14331 F1080.000 ; skirt
G1 X90.000 Y85.398 E1.25265 ; skirt
G1 X110.000 Y85.398 E2.75460 ; skirt
G1 X111.867 Y85.794 E2.89791 ; skirt
G1 X113.413 Y86.912 E3.04122 F1080.000 ; skirt
G1 X114.372 Y88.562 E3.18453 ; skirt
G1 X114.602 Y90.000 E3.29388 ; skirt
G1 X114.602 Y110.000 E4.79583 ; skirt
G1 X114.206 Y111.867 E4.93914 ; skirt
G1 X113.088 Y113.413 E5.08245 ; skirt
G1 X111.438 Y114.372 E5.22576 ; skirt
G1 X110.000 Y114.602 E5.33510 ; skirt
G1 X90.000 Y114.602 E6.83705 ; skirt
G1 X88.133 Y114.206 E6.98036 ; skirt
G1 X86.587 Y113.088 E7.12367 ; skirt
G1 X85.628 Y111.438 E7.26698 ; skirt
G1 X85.398 Y110.000 E7.37632 ; skirt
G1 X85.398 Y90.000 E8.87827 ; skirt
G1 X85.794 Y88.133 E9.02158 ; skirt
G1 X86.869 Y86.648 E9.15926 ; skirt
G1 F1800.000 E8.15926 ; retract
G92 E0 ; reset extrusion distance
G1 X108.481 Y105.469 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X108.481 Y108.481 E1.22619 F720.000 ; perimeter
G1 X91.519 Y108.481 E2.49996 F720.000 ; perimeter
G1 X91.519 Y91.519 E3.77373 ; perimeter
G1 X108.481 Y91.519 E5.04750 ; perimeter
G1 X108.481 Y105.394 E6.08946 ; perimeter
G1 X109.083 Y105.394 F4800.000 ; move to first perimeter point
G1 X109.083 Y109.083 E6.36649 F720.000 ; perimeter
G1 X90.917 Y109.083 E7.73070 ; perimeter
G1 X90.917 Y90.917 E9.09490 ; perimeter
G1 X109.083 Y90.917 E10.45911 F720.000 ; perimeter
G1 X109.083 Y105.319 E11.54065 ; perimeter
G1 X109.685 Y105.319 F4800.000 ; move to first perimeter point
G1 X109.685 Y109.685 E11.86853 F648.000 ; perimeter
G1 X90.315 Y109.685 E13.32317 F648.000 ; perimeter
G1 X90.315 Y90.315 E14.77781 ; perimeter
G1 X109.685 Y90.315 E16.23244 ; perimeter
G1 X109.685 Y105.244 E17.35357 ; perimeter
G1 X109.252 Y109.435 F4800.000 ; move inwards before travel
G1 X91.936 Y108.024 F4800.000 ; move to first fill point
G1 X91.976 Y108.064 E17.35781 F1080.000 ; fill
G1 X92.845 Y108.064 E17.42312 ; fill
G1 X91.936 Y107.155 E17.51973 ; fill
G1 X91.936 Y106.285 E17.58504 ; fill
G1 X93.715 Y108.064 E17.77401 ; fill
G1 X94.585 Y108.064 E17.83932 ; fill
G1 X91.936 Y105.415 E18.12065 ; fill
G1 X91.936 Y104.546 E18.18596 ; fill
G1 X95.454 Y108.064 E18.55965 ; fill
G1 X96.324 Y108.064 E18.62496 ; fill
G1 X91.936 Y103.676 E19.09101 ; fill
G1 X91.936 Y102.806 E19.15632 ; fill
G1 X97.194 Y108.064 E19.71473 ; fill
G1 X98.063 Y108.064 E19.78004 ; fill
G1 X91.936 Y101.937 E20.43081 ; fill
G1 X91.936 Y101.067 E20.49612 ; fill
G1 X98.933 Y108.064 E21.23925 ; fill
G1 X99.803 Y108.064 E21.30456 ; fill
G1 X91.936 Y100.197 E22.14005 ; fill
G1 X91.936 Y99.328 E22.20536 ; fill
G1 X100.672 Y108.064 E23.13321 ; fill
G1 X101.542 Y108.064 E23.19852 ; fill
G1 X91.936 Y98.458 E24.21874 ; fill
G1 X91.936 Y97.588 E24.28405 ; fill
G1 X102.412 Y108.064 E25.39662 ; fill
G1 X103.281 Y108.064 E25.46193 ; fill
G1 X91.936 Y96.719 E26.66687 ; fill
G1 X91.936 Y95.849 E26.73217 ; fill
G1 X104.151 Y108.064 E28.02947 ; fill
G1 X105.021 Y108.064 E28.09478 ; fill
G1 X91.936 Y94.979 E29.48444 ; fill
G1 X91.936 Y94.110 E29.54974 ; fill
G1 X105.890 Y108.064 E31.03176 ; fill
G1 X106.760 Y108.064 E31.09707 ; fill
G1 X91.936 Y93.240 E32.67145 ; fill
G1 X91.936 Y92.371 E32.73676 ; fill
G1 X107.629 Y108.064 E34.40349 ; fill
G1 X108.064 Y107.629 E34.44967 ; fill
G1 X92.371 Y91.936 E36.11641 ; fill
G1 X93.240 Y91.936 E36.18172 ; fill
G1 X108.064 Y106.760 E37.75610 ; fill
G1 X108.064 Y105.890 E37.82141 ; fill
G1 X94.110 Y91.936 E39.30343 ; fill
G1 X94.979 Y91.936 E39.36873 ; fill
G1 X108.064 Y105.021 E40.75839 ; fill
G1 X108.064 Y104.151 E40.82370 ; fill
G1 X95.849 Y91.936 E42.12100 ; fill
G1 X96.719 Y91.936 E42.18630 ; fill
G1 X108.064 Y103.281 E43.39124 ; fill
G1 X108.064 Y102.412 E43.45655 ; fill
G1 X97.588 Y91.936 E44.56912 ; fill
G1 X98.458 Y91.936 E44.63443 ; fill
G1 X108.064 Y101.542 E45.65465 ; fill
G1 X108.064 Y100.672 E45.71996 ; fill
G1 X99.328 Y91.936 E46.64781 ; fill
G1 X100.197 Y91.936 E46.71312 ; fill
G1 X108.064 Y99.803 E47.54861 ; fill
G1 X108.064 Y98.933 E47.61392 ; fill
G1 X101.067 Y91.936 E48.35705 ; fill
G1 X101.937 Y91.936 E48.42236 ; fill
G1 X108.064 Y98.063 E49.07313 ; fill
G1 X108.064 Y97.194 E49.13844 ; fill
G1 X102.806 Y91.936 E49.69685 ; fill
G1 X103.676 Y91.936 E49.76216 ; fill
G1 X108.064 Y96.324 E50.22821 ; fill
G1 X108.064 Y95.454 E50.29352 ; fill
G1 X104.546 Y91.936 E50.66721 ; fill
G1 X105.415 Y91.936 E50.73252 ; fill
G1 X108.064 Y94.585 E51.01385 ; fill
G1 X108.064 Y93.715 E51.07916 ; fill
G1 X106.285 Y91.936 E51.26813 ; fill
G1 X107.155 Y91.936 E51.33344 ; fill
G1 X108.064 Y92.845 E51.43005 ; fill
G1 X108.064 Y91.976 E51.49536 ; fill
G1 X108.024 Y91.936 E51.49960 ; fill
G1 F1800.000 E50.49960 ; retract
G92 E0 ; reset extrusion distance
G1 Z0.600 F4800.000 ; move to next layer (1)
G1 X109.121 Y105.588 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X109.121 Y109.121 E1.15837 F1704.421 ; perimeter
G1 X90.879 Y109.121 E1.97609 F1704.421 ; perimeter
G1 X90.879 Y90.879 E2.79382 ; perimeter
G1 X109.121 Y90.879 E3.61154 ; perimeter
G1 X109.121 Y105.513 E4.26754 ; perimeter
G1 X109.480 Y105.513 F4800.000 ; move to first perimeter point
G1 X109.480 Y109.480 E4.44538 F1704.421 ; perimeter
G1 X90.520 Y109.480 E5.29533 ; perimeter
G1 X90.520 Y90.520 E6.14527 ; perimeter
G1 X109.480 Y90.520 E6.99522 F1704.421 ; perimeter
G1 X109.480 Y105.438 E7.66397 ; perimeter
G1 X109.840 Y105.438 F4800.000 ; move to first perimeter point
G1 X109.840 Y109.840 E7.86128 F1533.979 ; perimeter
G1 X90.160 Y109.840 E8.74345 F1533.979 ; perimeter
G1 X90.160 Y90.160 E9.62563 ; perimeter
G1 X109.840 Y90.160 E10.50780 ; perimeter
G1 X109.840 Y105.363 E11.18929 ; perimeter
G1 X109.406 Y109.590 F4800.000 ; move inwards before travel
G1 X108.879 Y108.839 F4800.000 ; move to first fill point
G1 X108.839 Y108.879 E11.19163 F2556.632 ; fill
G1 X108.366 Y108.879 E11.21114 ; fill
G1 X108.879 Y108.366 E11.24107 ; fill
G1 X108.879 Y107.894 E11.26058 ; fill
G1 X107.894 Y108.879 E11.31811 ; fill
G1 X107.421 Y108.879 E11.33762 ; fill
G1 X108.879 Y107.421 E11.42275 ; fill
G1 X108.879 Y106.949 E11.44226 ; fill
G1 X106.949 Y108.879 E11.55498 ; fill
G1 X106.476 Y108.879 E11.57449 ; fill
G1 X108.879 Y106.476 E11.71481 ; fill
G1 X108.879 Y106.004 E11.73432 ; fill
G1 X106.004 Y108.879 E11.90223 ; fill
G1 X105.531 Y108.879 E11.92175 ; fill
G1 X108.879 Y105.531 E12.11725 ; fill
G1 X108.879 Y105.059 E12.13677 ; fill
G1 X105.059 Y108.879 E12.35987 ; fill
G1 X104.586 Y108.879 E12.37938 ; fill
G1 X108.879 Y104.586 E12.63008 ; fill
G1 X108.879 Y104.114 E12.64959 ; fill
G1 X104.114 Y108.879 E12.92788 ; fill
G1 X103.642 Y108.879 E12.94740 ; fill
G1 X108.879 Y103.642 E13.25329 ; fill
G1 X108.879 Y103.169 E13.27280 ; fill
G1 X103.169 Y108.879 E13.60629 ; fill
G1 X102.697 Y108.879 E13.62580 ; fill
G1 X108.879 Y102.697 E13.98688 ; fill
G1 X108.879 Y102.224 E14.00639 ; fill
G1 X102.224 Y108.879 E14.39507 ; fill
G1 X101.752 Y108.879 E14.41458 ; fill
G1 X108.879 Y101.752 E14.83085 ; fill
G1 X108.879 Y101.279 E14.85037 ; fill
G1 X101.279 Y108.879 E15.29423 ; fill
G1 X100.807 Y108.879 E15.31375 ; fill
G1 X108.879 Y100.807 E15.78521 ; fill
G1 X108.879 Y100.334 E15.80472 ; fill
G1 X100.334 Y108.879 E16.30378 ; fill
G1 X99.862 Y108.879 E16.32330 ; fill
G1 X108.879 Y99.862 E16.84995 ; fill
G1 X108.879 Y99.389 E16.86946 ; fill
G1 X104.448 Y103.820 E17.12827 ; fill
G1 X104.114 Y103.682 E17.14320 ; fill
G1 X108.879 Y98.917 E17.42152 ; fill
G1 X108.879 Y98.445 E17.44104 ; fill
G1 X103.779 Y103.544 E17.73887 ; fill
G1 X103.544 Y103.779 F4800.000 ; move to first fill point
G1 X98.445 Y108.879 E18.03670 F2556.632 ; fill
G1 X98.917 Y108.879 E18.05621 ; fill
G1 X103.682 Y104.114 E18.33453 ; fill
G1 X103.820 Y104.448 E18.34947 ; fill
G1 X99.389 Y108.879 E18.60827 ; fill
G1 X97.972 Y108.879 F4800.000 ; move to first fill point
G1 X108.879 Y97.972 E19.24531 F2556.632 ; fill
G1 X108.879 Y97.500 E19.26482 ; fill
G1 X103.460 Y102.918 E19.58132 ; fill
G1 X103.666 Y102.240 E19.61059 ; fill
G1 X108.879 Y97.027 E19.91508 ; fill
G1 X108.879 Y96.555 E19.93459 ; fill
G1 X103.871 Y101.562 E20.22706 ; fill
G1 X104.077 Y100.884 E20.25633 ; fill
G1 X108.879 Y96.082 E20.53678 ; fill
G1 X108.879 Y95.610 E20.55630 ; fill
G1 X104.144 Y100.344 E20.83283 ; fill
G1 X104.164 Y99.852 E20.85315 ; fill
G1 X108.879 Y95.137 E21.12855 ; fill
G1 X108.879 Y94.665 E21.14806 ; fill
G1 X104.121 Y99.422 E21.42593 ; fill
G1 X104.049 Y99.022 E21.44272 ; fill
G1 X108.879 Y94.192 E21.72483 ; fill
G1 X108.879 Y93.720 E21.74435 ; fill
G1 X103.939 Y98.660 E22.03288 ; fill
G1 X103.829 Y98.297 E22.04853 ; fill
G1 X108.879 Y93.248 E22.34349 ; fill
G1 X108.879 Y92.775 E22.36300 ; fill
G1 X103.719 Y97.935 E22.66439 ; fill
G1 X103.609 Y97.572 E22.68003 ; fill
G1 X108.879 Y92.303 E22.98784 ; fill
G1 X108.879 Y91.830 E23.00735 ; fill
G1 X103.499 Y97.210 E23.32158 ; fill
G1 X103.389 Y96.847 E23.33723 ; fill
G1 X103.780 Y96.456 E23.36008 ; fill
G1 X103.544 Y96.220 F4800.000 ; move to first fill point
G1 X103.153 Y96.611 E23.38293 F2556.632 ; fill
G1 X102.790 Y96.501 E23.39858 ; fill
G1 X108.170 Y91.121 E23.71281 ; fill
G1 X107.697 Y91.121 E23.73232 ; fill
G1 X102.428 Y96.391 E24.04013 ; fill
G1 X102.065 Y96.281 E24.05577 ; fill
G1 X107.225 Y91.121 E24.35716 ; fill
G1 X106.752 Y91.121 E24.37667 ; fill
G1 X101.703 Y96.171 E24.67163 ; fill
G1 X101.340 Y96.061 E24.68727 ; fill
G1 X106.280 Y91.121 E24.97581 ; fill
G1 X105.808 Y91.121 E24.99533 ; fill
G1 X100.978 Y95.951 E25.27744 ; fill
G1 X100.578 Y95.879 E25.29422 ; fill
G1 X105.335 Y91.121 E25.57210 ; fill
G1 X104.863 Y91.121 E25.59161 ; fill
G1 X100.148 Y95.836 E25.86701 ; fill
G1 X99.656 Y95.856 E25.88733 ; fill
G1 X104.390 Y91.121 E26.16386 ; fill
G1 X103.918 Y91.121 E26.18337 ; fill
G1 X99.116 Y95.923 E26.46383 ; fill
G1 X98.438 Y96.129 E26.49310 ; fill
G1 X103.445 Y91.121 E26.78557 ; fill
G1 X102.973 Y91.121 E26.80508 ; fill
G1 X97.760 Y96.334 E27.10957 ; fill
G1 X97.082 Y96.540 E27.13884 ; fill
G1 X102.500 Y91.121 E27.45534 ; fill
G1 X102.028 Y91.121 E27.47485 ; fill
G1 X91.121 Y102.028 E28.11189 ; fill
G1 X91.121 Y101.555 E28.13140 ; fill
G1 X96.221 Y96.456 E28.42923 ; fill
G1 X96.456 Y96.221 F4800.000 ; move to first fill point
G1 X101.555 Y91.121 E28.72707 F2556.632 ; fill
G1 X101.083 Y91.121 E28.74658 ; fill
G1 X96.318 Y95.886 E29.02490 ; fill
G1 X96.180 Y95.552 E29.03983 ; fill
G1 X100.611 Y91.121 E29.29864 ; fill
G1 X100.138 Y91.121 E29.31815 ; fill
G1 X91.121 Y100.138 E29.84481 ; fill
G1 X91.121 Y100.611 E29.86432 ; fill
G1 X95.552 Y96.180 E30.12313 ; fill
G1 X95.886 Y96.318 E30.13806 ; fill
G1 X91.121 Y101.083 E30.41638 ; fill
G1 X91.121 Y99.666 F4800.000 ; move to first fill point
G1 X99.666 Y91.121 E30.91544 F2556.632 ; fill
G1 X99.193 Y91.121 E30.93495 ; fill
G1 X91.121 Y99.193 E31.40642 ; fill
G1 X91.121 Y98.721 E31.42593 ; fill
G1 X98.721 Y91.121 E31.86980 ; fill
G1 X98.248 Y91.121 E31.88931 ; fill
G1 X91.121 Y98.248 E32.30558 ; fill
G1 X91.121 Y97.776 E32.32510 ; fill
G1 X97.776 Y91.121 E32.71377 ; fill
G1 X97.303 Y91.121 E32.73329 ; fill
G1 X91.121 Y97.303 E33.09437 ; fill
G1 X91.121 Y96.831 E33.11388 ; fill
G1 X96.831 Y91.121 E33.44736 ; fill
G1 X96.358 Y91.121 E33.46688 ; fill
G1 X91.121 Y96.358 E33.77277 ; fill
G1 X91.121 Y95.886 E33.79228 ; fill
G1 X95.886 Y91.121 E34.07057 ; fill
G1 X95.414 Y91.121 E34.09009 ; fill
G1 X91.121 Y95.414 E34.34078 ; fill
G1 X91.121 Y94.941 E34.36030 ; fill
G1 X94.941 Y91.121 E34.58340 ; fill
G1 X94.469 Y91.121 E34.60291 ; fill
G1 X91.121 Y94.469 E34.79842 ; fill
G1 X91.121 Y93.996 E34.81793 ; fill
G1 X93.996 Y91.121 E34.98584 ; fill
G1 X93.524 Y91.121 E35.00535 ; fill
G1 X91.121 Y93.524 E35.14567 ; fill
G1 X91.121 Y93.051 E35.16518 ; fill
G1 X93.051 Y91.121 E35.27790 ; fill
G1 X92.579 Y91.121 E35.29742 ; fill
G1 X91.121 Y92.579 E35.38254 ; fill
G1 X91.121 Y92.106 E35.40205 ; fill
G1 X92.106 Y91.121 E35.45958 ; fill
G1 X91.634 Y91.121 E35.47909 ; fill
G1 X91.121 Y91.634 E35.50902 ; fill
G1 X91.121 Y91.161 E35.52854 ; fill
G1 X91.161 Y91.121 E35.53087 ; fill
G1 X96.540 Y97.082 F4800.000 ; move to first fill point
G1 X91.121 Y102.500 E35.84738 F2556.632 ; fill
G1 X91.121 Y102.973 E35.86689 ; fill
G1 X96.334 Y97.760 E36.17138 ; fill
G1 X96.129 Y98.438 E36.20065 ; fill
G1 X91.121 Y103.445 E36.49312 ; fill
G1 X91.121 Y103.918 E36.51263 ; fill
G1 X95.923 Y99.116 E36.79308 ; fill
G1 X95.856 Y99.656 E36.81554 ; fill
G1 X91.121 Y104.390 E37.09207 ; fill
G1 X91.121 Y104.863 E37.11159 ; fill
G1 X95.836 Y100.148 E37.38698 ; fill
G1 X95.879 Y100.578 E37.40483 ; fill
G1 X91.121 Y105.335 E37.68270 ; fill
G1 X91.121 Y105.808 E37.70222 ; fill
G1 X95.951 Y100.978 E37.98433 ; fill
G1 X96.061 Y101.340 E37.99998 ; fill
G1 X91.121 Y106.280 E38.28852 ; fill
G1 X91.121 Y106.752 E38.30803 ; fill
G1 X96.171 Y101.703 E38.60299 ; fill
G1 X96.281 Y102.065 E38.61863 ; fill
G1 X91.121 Y107.225 E38.92002 ; fill
G1 X91.121 Y107.697 E38.93953 ; fill
G1 X96.391 Y102.428 E39.24734 ; fill
G1 X96.501 Y102.790 E39.26298 ; fill
G1 X91.121 Y108.170 E39.57721 ; fill
G1 X91.121 Y108.642 E39.59673 ; fill
G1 X95.596 Y104.168 E39.85809 ; fill
G1 X95.832 Y104.404 E39.87189 ; fill
G1 X91.358 Y108.879 E40.13326 ; fill
G1 X91.830 Y108.879 E40.15277 ; fill
G1 X97.210 Y103.499 E40.46700 ; fill
G1 X96.847 Y103.389 E40.48265 ; fill
G1 X96.456 Y103.780 E40.50550 ; fill
G1 X96.220 Y103.544 F4800.000 ; move to first fill point
G1 X96.611 Y103.153 E40.52835 F2556.632 ; fill
G1 X97.572 Y103.609 F4800.000 ; move to first fill point
G1 X92.303 Y108.879 E40.83616 F2556.632 ; fill
G1 X92.775 Y108.879 E40.85567 ; fill
G1 X97.935 Y103.719 E41.15706 ; fill
G1 X98.297 Y103.829 E41.17270 ; fill
G1 X93.248 Y108.879 E41.46766 ; fill
G1 X93.720 Y108.879 E41.48718 ; fill
G1 X98.660 Y103.939 E41.77571 ; fill
G1 X99.022 Y104.049 E41.79136 ; fill
G1 X94.192 Y108.879 E42.07348 ; fill
G1 X94.665 Y108.879 E42.09299 ; fill
G1 X99.422 Y104.121 E42.37086 ; fill
G1 X99.852 Y104.164 E42.38871 ; fill
G1 X95.137 Y108.879 E42.66411 ; fill
G1 X95.610 Y108.879 E42.68362 ; fill
G1 X100.344 Y104.144 E42.96015 ; fill
G1 X100.884 Y104.077 E42.98261 ; fill
G1 X96.082 Y108.879 E43.26306 ; fill
G1 X96.555 Y108.879 E43.28258 ; fill
G1 X101.562 Y103.871 E43.57504 ; fill
G1 X102.240 Y103.666 E43.60431 ; fill
G1 X97.027 Y108.879 E43.90880 ; fill
G1 X97.500 Y108.879 E43.92831 ; fill
G1 X102.918 Y103.460 E44.24481 ; fill
G1 X104.404 Y95.832 F4800.000 ; move to first fill point
G1 X108.879 Y91.358 E44.50618 F2556.632 ; fill
G1 X108.642 Y91.121 E44.51998 ; fill
G1 X104.168 Y95.596 E44.78135 ; fill
G1 X103.660 Y103.629 F4800.000 ; move to first fill point
G1 X103.629 Y103.660 E44.78488 F2130.526 ; fill
G1 X104.050 Y104.339 E44.85007 ; fill
G1 X104.339 Y104.050 E44.88338 ; fill
G1 X103.248 Y103.188 F4800.000 ; move to first fill point
G1 X103.188 Y103.248 E44.89031 F2130.526 ; fill
G1 X101.766 Y103.679 E45.01154 ; fill
G1 X103.679 Y101.766 E45.23230 ; fill
G1 X104.009 Y100.447 E45.34336 ; fill
G1 X100.447 Y104.009 E45.75459 ; fill
G1 X99.465 Y104.000 E45.83470 ; fill
G1 X104.000 Y99.465 E46.35821 ; fill
G1 X103.810 Y98.665 E46.42532 ; fill
G1 X98.665 Y103.810 E47.01921 ; fill
G1 X97.906 Y103.579 E47.08401 ; fill
G1 X103.579 Y97.906 E47.73900 ; fill
G1 X103.349 Y97.146 E47.80379 ; fill
G1 X97.146 Y103.349 E48.51987 ; fill
G1 X96.651 Y102.854 E48.57702 ; fill
G1 X102.854 Y96.651 E49.29309 ; fill
G1 X102.094 Y96.421 E49.35789 ; fill
G1 X96.421 Y102.094 E50.01287 ; fill
G1 X96.190 Y101.335 E50.07767 ; fill
G1 X101.335 Y96.190 E50.67156 ; fill
G1 X100.535 Y96.000 E50.73868 ; fill
G1 X96.000 Y100.535 E51.26219 ; fill
G1 X95.991 Y99.553 E51.34230 ; fill
G1 X99.553 Y95.991 E51.75353 ; fill
G1 X98.234 Y96.321 E51.86460 ; fill
G1 X96.321 Y98.234 E52.08536 ; fill
G1 X96.752 Y96.812 E52.20659 ; fill
G1 X96.812 Y96.752 E52.21352 ; fill
G1 X104.355 Y96.083 F4800.000 ; move to first fill point
G1 X104.406 Y96.032 E52.21943 F2130.526 ; fill
G1 X96.371 Y96.340 F4800.000 ; move to first fill point
G1 X96.340 Y96.371 E52.22296 F2130.526 ; fill
G1 X95.661 Y95.950 E52.28814 ; fill
G1 X95.950 Y95.661 E52.32146 ; fill
G1 X96.083 Y104.355 F4800.000 ; move to first fill point
G1 X96.032 Y104.406 E52.32736 F2130.526 ; fill
G1 F1800.000 E51.32736 ; retract
G92 E0 ; reset extrusion distance
G1 Z0.900 F4800.000 ; move to next layer (2)
G1 X97.338 Y102.815 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X97.254 Y102.746 E1.00485 F1701.446 ; perimeter
G1 X96.771 Y102.158 E1.03898 ; perimeter
G1 X96.412 Y101.486 E1.07311 ; perimeter
G1 X96.191 Y100.758 E1.10723 ; perimeter
G1 X96.116 Y100.000 E1.14136 ; perimeter
G1 X96.173 Y99.426 E1.16721 ; perimeter
G1 X96.191 Y99.242 E1.17549 ; perimeter
G1 X96.412 Y98.514 E1.20962 ; perimeter
G1 X96.771 Y97.842 E1.24375 ; perimeter
G1 X97.254 Y97.254 E1.27788 ; perimeter
G1 X97.842 Y96.771 E1.31200 ; perimeter
G1 X98.514 Y96.412 E1.34613 ; perimeter
G1 X99.242 Y96.191 E1.38026 ; perimeter
G1 X100.000 Y96.116 E1.41439 ; perimeter
G1 X100.574 Y96.173 E1.44024 ; perimeter
G1 X100.758 Y96.191 E1.44852 F1701.446 ; perimeter
G1 X101.486 Y96.412 E1.48265 ; perimeter
G1 X102.158 Y96.771 E1.51677 ; perimeter
G1 X102.746 Y97.254 E1.55090 ; perimeter
G1 X103.229 Y97.842 E1.58503 ; perimeter
G1 X103.588 Y98.514 E1.61916 ; perimeter
G1 X103.809 Y99.242 E1.65329 ; perimeter
G1 X103.884 Y100.000 E1.68742 ; perimeter
G1 X103.809 Y100.758 E1.72154 ; perimeter
G1 X103.588 Y101.486 E1.75567 ; perimeter
G1 X103.229 Y102.158 E1.78980 ; perimeter
G1 X102.746 Y102.746 E1.82393 ; perimeter
G1 X102.158 Y103.229 E1.85806 ; perimeter
G1 X101.486 Y103.588 E1.89218 ; perimeter
G1 X100.758 Y103.809 E1.92631 ; perimeter
G1 X100.000 Y103.884 E1.96044 ; perimeter
G1 X99.242 Y103.809 E1.99457 ; perimeter
G1 X98.514 Y103.588 E2.02870 ; perimeter
G1 X97.842 Y103.229 E2.06283 ; perimeter
G1 X97.395 Y102.862 E2.08874 ; perimeter
G1 X97.623 Y102.584 F4800.000 ; move to first perimeter point
G1 X97.509 Y102.491 E2.09537 F1701.446 ; perimeter
G1 X97.071 Y101.957 E2.12632 ; perimeter
G1 X96.746 Y101.348 E2.15728 ; perimeter
G1 X96.545 Y100.687 E2.18823 ; perimeter
G1 X96.478 Y100.000 E2.21919 ; perimeter
G1 X96.545 Y99.313 E2.25014 ; perimeter
G1 X96.746 Y98.652 E2.28109 ; perimeter
G1 X97.071 Y98.043 E2.31205 ; perimeter
G1 X97.509 Y97.509 E2.34300 ; perimeter
G1 X98.043 Y97.071 E2.37396 ; perimeter
G1 X98.652 Y96.746 E2.40491 ; perimeter
G1 X99.313 Y96.545 E2.43587 ; perimeter
G1 X99.851 Y96.492 E2.46013 ; perimeter
G1 X100.000 Y96.478 E2.46682 F1701.446 ; perimeter
G1 X100.687 Y96.545 E2.49778 ; perimeter
G1 X101.348 Y96.746 E2.52873 ; perimeter
G1 X101.957 Y97.071 E2.55969 ; perimeter
G1 X102.491 Y97.509 E2.59064 ; perimeter
G1 X102.929 Y98.043 E2.62159 ; perimeter
G1 X103.254 Y98.652 E2.65255 ; perimeter
G1 X103.455 Y99.313 E2.68350 ; perimeter
G1 X103.522 Y100.000 E2.71446 ; perimeter
G1 X103.455 Y100.687 E2.74541 ; perimeter
G1 X103.254 Y101.348 E2.77637 ; perimeter
G1 X102.929 Y101.957 E2.80732 ; perimeter
G1 X102.491 Y102.491 E2.83828 ; perimeter
G1 X101.957 Y102.929 E2.86923 ; perimeter
G1 X101.348 Y103.254 E2.90018 ; perimeter
G1 X100.687 Y103.455 E2.93114 ; perimeter
G1 X100.000 Y103.522 E2.96209 ; perimeter
G1 X99.313 Y103.455 E2.99305 ; perimeter
G1 X98.652 Y103.254 E3.02400 ; perimeter
G1 X98.043 Y102.929 E3.05496 ; perimeter
G1 X97.681 Y102.632 E3.07593 ; perimeter
G1 X97.909 Y102.354 F4800.000 ; move to first perimeter point
G1 X97.765 Y102.235 E3.08433 F1531.301 ; perimeter
G1 X97.371 Y101.756 E3.11211 ; perimeter
G1 X97.079 Y101.210 E3.13989 ; perimeter
G1 X96.899 Y100.617 E3.16767 ; perimeter
G1 X96.839 Y100.000 E3.19545 ; perimeter
G1 X96.899 Y99.383 E3.22323 ; perimeter
G1 X97.079 Y98.790 E3.25101 ; perimeter
G1 X97.371 Y98.244 E3.27879 ; perimeter
G1 X97.765 Y97.765 E3.30657 ; perimeter
G1 X98.244 Y97.371 E3.33435 ; perimeter
G1 X98.790 Y97.079 E3.36213 ; perimeter
G1 X99.383 Y96.899 E3.38991 ; perimeter
G1 X100.000 Y96.839 E3.41769 ; perimeter
G1 X100.503 Y96.888 E3.44037 ; perimeter
G1 X100.617 Y96.899 E3.44548 F1531.301 ; perimeter
G1 X101.210 Y97.079 E3.47326 ; perimeter
G1 X101.756 Y97.371 E3.50104 ; perimeter
G1 X102.235 Y97.765 E3.52882 ; perimeter
G1 X102.629 Y98.244 E3.55660 ; perimeter
G1 X102.921 Y98.790 E3.58438 ; perimeter
G1 X103.101 Y99.383 E3.61216 ; perimeter
G1 X103.161 Y100.000 E3.63994 ; perimeter
G1 X103.101 Y100.617 E3.66772 ; perimeter
G1 X102.921 Y101.210 E3.69550 ; perimeter
G1 X102.629 Y101.756 E3.72328 ; perimeter
G1 X102.235 Y102.235 E3.75106 ; perimeter
G1 X101.756 Y102.629 E3.77884 ; perimeter
G1 X101.210 Y102.921 E3.80663 ; perimeter
G1 X100.617 Y103.101 E3.83441 ; perimeter
G1 X100.000 Y103.161 E3.86219 ; perimeter
G1 X99.383 Y103.101 E3.88997 ; perimeter
G1 X98.790 Y102.921 E3.91775 ; perimeter
G1 X98.244 Y102.629 E3.94553 ; perimeter
G1 X97.967 Y102.402 E3.96155 ; perimeter
G1 F1800.000 E2.96155 ; retract
G92 E0 ; reset extrusion distance
G1 X100.525 Y96.777 F4800.000 ; move inwards before travel
G1 X90.879 Y101.971 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X90.879 Y90.879 E1.49722 F1701.446 ; perimeter
G1 X109.121 Y90.879 E2.31494 ; perimeter
G1 X109.121 Y109.121 E3.13267 ; perimeter
G1 X90.879 Y109.121 E3.95039 F1701.446 ; perimeter
G1 X90.879 Y102.046 E4.26754 ; perimeter
G1 X90.520 Y102.046 F4800.000 ; move to first perimeter point
G1 X90.520 Y90.520 E4.78423 F1701.446 ; perimeter
G1 X109.480 Y90.520 E5.63418 F1701.446 ; perimeter
G1 X109.480 Y109.480 E6.48413 ; perimeter
G1 X90.520 Y109.480 E7.33407 ; perimeter
G1 X90.520 Y102.121 E7.66397 ; perimeter
G1 X90.160 Y102.121 F4800.000 ; move to first perimeter point
G1 X90.160 Y90.160 E8.20013 F1531.301 ; perimeter
G1 X109.840 Y90.160 E9.08230 ; perimeter
G1 X109.840 Y109.840 E9.96448 ; perimeter
G1 X90.160 Y109.840 E10.84665 F1531.301 ; perimeter
G1 X90.160 Y102.196 E11.18929 ; perimeter
G1 F1800.000 E10.18929 ; retract
G92 E0 ; reset extrusion distance
G1 X110.090 Y109.406 F4800.000 ; move inwards before travel
G1 X96.332 Y103.702 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X96.262 Y103.683 E1.00328 F2552.168 ; fill
G1 X96.190 Y104.043 E1.02007 ; fill
G1 X95.706 Y103.913 E1.04298 ; fill
G1 X96.881 Y102.705 F4800.000 ; move to first fill point
G1 X96.939 Y102.916 E1.05298 F2552.168 ; fill
G1 X97.100 Y102.959 E1.06060 ; fill
G1 X97.155 Y103.004 E1.06385 ; fill
G1 X97.701 Y103.450 F4800.000 ; move to first fill point
G1 X97.789 Y103.523 E1.06909 F2552.168 ; fill
G1 X97.884 Y103.548 E1.07355 ; fill
G1 X96.514 Y102.233 F4800.000 ; move to first fill point
G1 X96.481 Y102.224 E1.07512 F2552.168 ; fill
G1 F1800.000 E0.07512 ; retract
G92 E0 ; reset extrusion distance
G1 X102.344 Y103.415 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X102.461 Y103.447 E1.00557 F2552.168 ; fill
G1 X103.452 Y102.444 E1.07002 ; fill
G1 X103.423 Y102.335 E1.07520 ; fill
G1 X103.244 Y96.870 F4800.000 ; move to first fill point
G1 X103.128 Y96.986 E1.08270 F2552.168 ; fill
G1 X102.690 Y96.869 E1.10344 ; fill
G1 X103.712 Y96.194 F4800.000 ; move to first fill point
G1 X103.908 Y96.246 E1.11273 F2552.168 ; fill
G1 X97.787 Y96.503 F4800.000 ; move to first fill point
G1 X97.742 Y96.491 E1.11486 F2552.168 ; fill
G1 X97.414 Y96.783 E1.13490 ; fill
G1 X97.078 Y96.693 E1.15084 ; fill
G1 X96.884 Y96.752 E1.16010 ; fill
G1 X96.752 Y96.884 E1.16865 ; fill
G1 X96.510 Y97.774 E1.21083 ; fill
G1 X96.497 Y97.725 E1.21319 ; fill
G1 X96.220 Y96.456 F4800.000 ; move to first fill point
G1 X96.611 Y96.847 E1.23605 F2552.168 ; fill
G1 X96.501 Y97.210 E1.25169 ; fill
G1 X91.121 Y91.830 E1.56592 ; fill
G1 X91.121 Y92.303 E1.58543 ; fill
G1 X96.391 Y97.572 E1.89324 ; fill
G1 X96.281 Y97.935 E1.90888 ; fill
G1 X91.121 Y92.775 E2.21027 ; fill
G1 X91.121 Y93.248 E2.22978 ; fill
G1 X96.171 Y98.297 E2.52474 ; fill
G1 X96.061 Y98.660 E2.54039 ; fill
G1 X91.121 Y93.720 E2.82892 ; fill
G1 X91.121 Y94.192 E2.84844 ; fill
G1 X95.951 Y99.022 E3.13055 ; fill
G1 X95.879 Y99.422 E3.14733 ; fill
G1 X91.121 Y94.665 E3.42520 ; fill
G1 X91.121 Y95.137 E3.44472 ; fill
G1 X95.836 Y99.852 E3.72011 ; fill
G1 X95.856 Y100.344 E3.74044 ; fill
G1 X91.121 Y95.610 E4.01697 ; fill
G1 X91.121 Y96.082 E4.03648 ; fill
G1 X95.923 Y100.884 E4.31693 ; fill
G1 X96.129 Y101.562 E4.34620 ; fill
G1 X91.121 Y96.555 E4.63867 ; fill
G1 X91.121 Y97.027 E4.65818 ; fill
G1 X96.334 Y102.240 E4.96267 ; fill
G1 X96.540 Y102.918 E4.99194 ; fill
G1 X91.121 Y97.500 E5.30844 ; fill
G1 X91.121 Y97.972 E5.32795 ; fill
G1 X102.028 Y108.879 E5.96499 ; fill
G1 X101.555 Y108.879 E5.98450 ; fill
G1 X96.456 Y103.779 E6.28233 ; fill
G1 X96.221 Y103.544 F4800.000 ; move to first fill point
G1 X91.121 Y98.445 E6.58016 F2552.168 ; fill
G1 X91.121 Y98.917 E6.59967 ; fill
G1 X95.886 Y103.682 E6.87799 ; fill
G1 X95.552 Y103.820 E6.89293 ; fill
G1 X91.121 Y99.389 E7.15173 ; fill
G1 X91.121 Y99.862 E7.17124 ; fill
G1 X100.138 Y108.879 E7.69790 ; fill
G1 X100.611 Y108.879 E7.71741 ; fill
G1 X96.180 Y104.448 E7.97622 ; fill
G1 X96.318 Y104.114 E7.99115 ; fill
G1 X101.083 Y108.879 E8.26947 ; fill
G1 X99.666 Y108.879 F4800.000 ; move to first fill point
G1 X91.121 Y100.334 E8.76853 F2552.168 ; fill
G1 X91.121 Y100.807 E8.78804 ; fill
G1 X99.193 Y108.879 E9.25951 ; fill
G1 X98.721 Y108.879 E9.27902 ; fill
G1 X91.121 Y101.279 E9.72289 ; fill
G1 X91.121 Y101.752 E9.74240 ; fill
G1 X98.248 Y108.879 E10.15867 ; fill
G1 X97.776 Y108.879 E10.17818 ; fill
G1 X91.121 Y102.224 E10.56686 ; fill
G1 X91.121 Y102.697 E10.58637 ; fill
G1 X97.303 Y108.879 E10.94745 ; fill
G1 X96.831 Y108.879 E10.96697 ; fill
G1 X91.121 Y103.169 E11.30045 ; fill
G1 X91.121 Y103.642 E11.31997 ; fill
G1 X96.358 Y108.879 E11.62585 ; fill
G1 X95.886 Y108.879 E11.64537 ; fill
G1 X91.121 Y104.114 E11.92366 ; fill
G1 X91.121 Y104.586 E11.94317 ; fill
G1 X95.414 Y108.879 E12.19387 ; fill
G1 X94.941 Y108.879 E12.21338 ; fill
G1 X91.121 Y105.059 E12.43649 ; fill
G1 X91.121 Y105.531 E12.45600 ; fill
G1 X94.469 Y108.879 E12.65151 ; fill
G1 X93.996 Y108.879 E12.67102 ; fill
G1 X91.121 Y106.004 E12.83893 ; fill
G1 X91.121 Y106.476 E12.85844 ; fill
G1 X93.524 Y108.879 E12.99876 ; fill
G1 X93.051 Y108.879 E13.01827 ; fill
G1 X91.121 Y106.949 E13.13099 ; fill
G1 X91.121 Y107.421 E13.15050 ; fill
G1 X92.579 Y108.879 E13.23563 ; fill
G1 X92.106 Y108.879 E13.25514 ; fill
G1 X91.121 Y107.894 E13.31267 ; fill
G1 X91.121 Y108.366 E13.33218 ; fill
G1 X91.634 Y108.879 E13.36211 ; fill
G1 X91.161 Y108.879 E13.38163 ; fill
G1 X91.121 Y108.839 E13.38396 ; fill
G1 X97.082 Y103.460 F4800.000 ; move to first fill point
G1 X102.500 Y108.879 E13.70046 F2552.168 ; fill
G1 X102.973 Y108.879 E13.71997 ; fill
G1 X97.760 Y103.666 E14.02446 ; fill
G1 X98.438 Y103.871 E14.05373 ; fill
G1 X103.445 Y108.879 E14.34620 ; fill
G1 X103.918 Y108.879 E14.36571 ; fill
G1 X99.116 Y104.077 E14.64616 ; fill
G1 X99.656 Y104.144 E14.66862 ; fill
G1 X104.390 Y108.879 E14.94515 ; fill
G1 X104.863 Y108.879 E14.96466 ; fill
G1 X100.148 Y104.164 E15.24006 ; fill
G1 X100.578 Y104.121 E15.25791 ; fill
G1 X105.335 Y108.879 E15.53578 ; fill
G1 X105.808 Y108.879 E15.55529 ; fill
G1 X100.978 Y104.049 E15.83740 ; fill
G1 X101.340 Y103.939 E15.85305 ; fill
G1 X106.280 Y108.879 E16.14159 ; fill
G1 X106.752 Y108.879 E16.16110 ; fill
G1 X101.703 Y103.829 E16.45606 ; fill
G1 X102.065 Y103.719 E16.47171 ; fill
G1 X107.225 Y108.879 E16.77309 ; fill
G1 X107.697 Y108.879 E16.79260 ; fill
G1 X102.428 Y103.609 E17.10041 ; fill
G1 X102.790 Y103.499 E17.11605 ; fill
G1 X108.170 Y108.879 E17.43028 ; fill
G1 X108.642 Y108.879 E17.44979 ; fill
G1 X104.168 Y104.404 E17.71116 ; fill
G1 X104.404 Y104.168 E17.72496 ; fill
G1 X108.879 Y108.642 E17.98633 ; fill
G1 X108.879 Y108.170 E18.00584 ; fill
G1 X103.499 Y102.790 E18.32007 ; fill
G1 X103.389 Y103.153 E18.33571 ; fill
G1 X103.780 Y103.544 E18.35856 ; fill
G1 X103.544 Y103.780 F4800.000 ; move to first fill point
G1 X103.153 Y103.389 E18.38141 F2552.168 ; fill
G1 X103.609 Y102.428 F4800.000 ; move to first fill point
G1 X108.879 Y107.697 E18.68922 F2552.168 ; fill
G1 X108.879 Y107.225 E18.70873 ; fill
G1 X103.719 Y102.065 E19.01011 ; fill
G1 X103.829 Y101.703 E19.02576 ; fill
G1 X108.879 Y106.752 E19.32072 ; fill
G1 X108.879 Y106.280 E19.34023 ; fill
G1 X103.939 Y101.340 E19.62877 ; fill
G1 X104.049 Y100.978 E19.64442 ; fill
G1 X108.879 Y105.808 E19.92653 ; fill
G1 X108.879 Y105.335 E19.94604 ; fill
G1 X104.121 Y100.578 E20.22391 ; fill
G1 X104.164 Y100.148 E20.24176 ; fill
G1 X108.879 Y104.863 E20.51716 ; fill
G1 X108.879 Y104.390 E20.53667 ; fill
G1 X104.144 Y99.656 E20.81320 ; fill
G1 X104.077 Y99.116 E20.83566 ; fill
G1 X108.879 Y103.918 E21.11611 ; fill
G1 X108.879 Y103.445 E21.13562 ; fill
G1 X103.871 Y98.438 E21.42809 ; fill
G1 X103.666 Y97.760 E21.45736 ; fill
G1 X108.879 Y102.973 E21.76184 ; fill
G1 X108.879 Y102.500 E21.78136 ; fill
G1 X103.460 Y97.082 E22.09786 ; fill
G1 X103.779 Y96.456 F4800.000 ; move to first fill point
G1 X108.879 Y101.555 E22.39569 F2552.168 ; fill
G1 X108.879 Y101.083 E22.41520 ; fill
G1 X104.114 Y96.318 E22.69352 ; fill
G1 X104.448 Y96.180 E22.70845 ; fill
G1 X108.879 Y100.611 E22.96726 ; fill
G1 X108.879 Y102.028 F4800.000 ; move to first fill point
G1 X97.972 Y91.121 E23.60430 F2552.168 ; fill
G1 X97.500 Y91.121 E23.62381 ; fill
G1 X102.918 Y96.540 E23.94031 ; fill
G1 X102.240 Y96.334 E23.96958 ; fill
G1 X97.027 Y91.121 E24.27406 ; fill
G1 X96.555 Y91.121 E24.29358 ; fill
G1 X101.562 Y96.129 E24.58604 ; fill
G1 X100.884 Y95.923 E24.61531 ; fill
G1 X96.082 Y91.121 E24.89576 ; fill
G1 X95.610 Y91.121 E24.91528 ; fill
G1 X100.344 Y95.856 E25.19180 ; fill
G1 X99.852 Y95.836 E25.21213 ; fill
G1 X95.137 Y91.121 E25.48753 ; fill
G1 X94.665 Y91.121 E25.50704 ; fill
G1 X99.422 Y95.879 E25.78491 ; fill
G1 X99.022 Y95.951 E25.80169 ; fill
G1 X94.192 Y91.121 E26.08381 ; fill
G1 X93.720 Y91.121 E26.10332 ; fill
G1 X98.660 Y96.061 E26.39186 ; fill
G1 X98.297 Y96.171 E26.40750 ; fill
G1 X93.248 Y91.121 E26.70246 ; fill
G1 X92.775 Y91.121 E26.72198 ; fill
G1 X97.935 Y96.281 E27.02336 ; fill
G1 X97.572 Y96.391 E27.03900 ; fill
G1 X92.303 Y91.121 E27.34681 ; fill
G1 X91.830 Y91.121 E27.36632 ; fill
G1 X97.210 Y96.501 E27.68055 ; fill
G1 X96.847 Y96.611 E27.69620 ; fill
G1 X96.456 Y96.220 E27.71905 ; fill
G1 X95.832 Y95.596 F4800.000 ; move to first fill point
G1 X91.358 Y91.121 E27.98041 F2552.168 ; fill
G1 X91.121 Y91.358 E27.99421 ; fill
G1 X95.596 Y95.832 E28.25558 ; fill
G1 X103.544 Y96.221 F4800.000 ; move to first fill point
G1 X98.445 Y91.121 E28.55341 F2552.168 ; fill
G1 X98.917 Y91.121 E28.57292 ; fill
G1 X103.682 Y95.886 E28.85124 ; fill
G1 X103.820 Y95.552 E28.86618 ; fill
G1 X99.389 Y91.121 E29.12498 ; fill
G1 X99.862 Y91.121 E29.14449 ; fill
G1 X108.879 Y100.138 E29.67115 ; fill
G1 X108.879 Y99.666 E29.69066 ; fill
G1 X100.334 Y91.121 E30.18972 ; fill
G1 X100.807 Y91.121 E30.20923 ; fill
G1 X108.879 Y99.193 E30.68070 ; fill
G1 X108.879 Y98.721 E30.70021 ; fill
G1 X101.279 Y91.121 E31.14408 ; fill
G1 X101.752 Y91.121 E31.16359 ; fill
G1 X108.879 Y98.248 E31.57986 ; fill
G1 X108.879 Y97.776 E31.59938 ; fill
G1 X102.224 Y91.121 E31.98805 ; fill
G1 X102.697 Y91.121 E32.00757 ; fill
G1 X108.879 Y97.303 E32.36865 ; fill
G1 X108.879 Y96.831 E32.38816 ; fill
G1 X103.169 Y91.121 E32.72165 ; fill
G1 X103.642 Y91.121 E32.74116 ; fill
G1 X108.879 Y96.358 E33.04705 ; fill
G1 X108.879 Y95.886 E33.06656 ; fill
G1 X104.114 Y91.121 E33.34485 ; fill
G1 X104.586 Y91.121 E33.36437 ; fill
G1 X108.879 Y95.414 E33.61507 ; fill
G1 X108.879 Y94.941 E33.63458 ; fill
G1 X105.059 Y91.121 E33.85768 ; fill
G1 X105.531 Y91.121 E33.87719 ; fill
G1 X108.879 Y94.469 E34.07270 ; fill
G1 X108.879 Y93.996 E34.09221 ; fill
G1 X106.004 Y91.121 E34.26012 ; fill
G1 X106.476 Y91.121 E34.27964 ; fill
G1 X108.879 Y93.524 E34.41995 ; fill
G1 X108.879 Y93.051 E34.43947 ; fill
G1 X106.949 Y91.121 E34.55218 ; fill
G1 X107.421 Y91.121 E34.57170 ; fill
G1 X108.879 Y92.579 E34.65682 ; fill
G1 X108.879 Y92.106 E34.67633 ; fill
G1 X107.894 Y91.121 E34.73386 ; fill
G1 X108.366 Y91.121 E34.75338 ; fill
G1 X108.879 Y91.634 E34.78331 ; fill
G1 X108.879 Y91.161 E34.80282 ; fill
G1 X108.839 Y91.121 E34.80516 ; fill
M106 S255 ; enable fan
G1 F1800.000 E33.80516 ; retract
G92 E0 ; reset extrusion distance
G1 Z1.200 F4800.000 ; move to next layer (3)
G1 X102.746 Y97.254 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X103.809 Y98.549 E1.07508 F1702.868 ; perimeter
G1 X103.599 Y98.549 E1.08450 ; perimeter
G1 X103.809 Y99.242 E1.11700 ; perimeter
G1 X103.884 Y100.000 E1.15113 ; perimeter
G1 X103.809 Y100.758 E1.18526 ; perimeter
G1 X103.588 Y101.486 E1.21939 ; perimeter
G1 X103.229 Y102.158 E1.25351 ; perimeter
G1 X102.746 Y102.746 E1.28764 ; perimeter
G1 X102.158 Y103.229 E1.32177 ; perimeter
G1 X101.486 Y103.588 E1.35590 ; perimeter
G1 X100.758 Y103.809 E1.39003 ; perimeter
G1 X100.000 Y103.884 E1.42416 ; perimeter
G1 X99.242 Y103.809 E1.45828 ; perimeter
G1 X98.514 Y103.588 E1.49241 ; perimeter
G1 X97.842 Y103.229 E1.52654 ; perimeter
G1 X97.254 Y102.746 E1.56067 ; perimeter
G1 X96.771 Y102.158 E1.59480 ; perimeter
G1 X96.412 Y101.486 E1.62893 ; perimeter
G1 X96.191 Y100.758 E1.66305 ; perimeter
G1 X96.146 Y100.301 E1.68363 ; perimeter
G1 X96.116 Y100.000 E1.69718 ; perimeter
G1 X96.191 Y99.242 E1.73131 ; perimeter
G1 X96.412 Y98.514 E1.76544 ; perimeter
G1 X96.771 Y97.842 E1.79957 ; perimeter
G1 X97.254 Y97.254 E1.83370 ; perimeter
G1 X97.842 Y96.771 E1.86782 ; perimeter
G1 X98.514 Y96.412 E1.90195 ; perimeter
G1 X99.242 Y96.191 E1.93608 ; perimeter
G1 X100.000 Y96.116 E1.97021 ; perimeter
G1 X100.457 Y96.161 E1.99079 ; perimeter
G1 X100.758 Y96.191 E2.00434 F1702.868 ; perimeter
G1 X101.486 Y96.412 E2.03847 ; perimeter
G1 X102.158 Y96.771 E2.07259 ; perimeter
G1 X102.688 Y97.206 E2.10336 ; perimeter
G1 X102.460 Y97.484 F4800.000 ; move to first perimeter point
G1 X103.049 Y98.189 E2.14453 F1702.868 ; perimeter
G1 X103.007 Y98.189 E2.14641 ; perimeter
G1 X103.254 Y98.652 E2.16993 ; perimeter
G1 X103.455 Y99.313 E2.20089 ; perimeter
G1 X103.522 Y100.000 E2.23184 ; perimeter
G1 X103.455 Y100.687 E2.26280 ; perimeter
G1 X103.254 Y101.348 E2.29375 ; perimeter
G1 X102.929 Y101.957 E2.32471 ; perimeter
G1 X102.491 Y102.491 E2.35566 ; perimeter
G1 X101.957 Y102.929 E2.38661 ; perimeter
G1 X101.348 Y103.254 E2.41757 ; perimeter
G1 X100.687 Y103.455 E2.44852 ; perimeter
G1 X100.000 Y103.522 E2.47948 ; perimeter
G1 X99.313 Y103.455 E2.51043 ; perimeter
G1 X98.652 Y103.254 E2.54139 ; perimeter
G1 X98.043 Y102.929 E2.57234 ; perimeter
G1 X97.509 Y102.491 E2.60330 ; perimeter
G1 X97.071 Y101.957 E2.63425 ; perimeter
G1 X96.746 Y101.348 E2.66520 ; perimeter
G1 X96.545 Y100.687 E2.69616 ; perimeter
G1 X96.504 Y100.266 E2.71515 ; perimeter
G1 X96.478 Y100.000 E2.72711 ; perimeter
G1 X96.545 Y99.313 E2.75807 ; perimeter
G1 X96.746 Y98.652 E2.78902 ; perimeter
G1 X97.071 Y98.043 E2.81998 ; perimeter
G1 X97.509 Y97.509 E2.85093 ; perimeter
G1 X98.043 Y97.071 E2.88189 ; perimeter
G1 X98.652 Y96.746 E2.91284 ; perimeter
G1 X99.313 Y96.545 E2.94380 ; perimeter
G1 X99.734 Y96.504 E2.96279 ; perimeter
G1 X100.000 Y96.478 E2.97475 F1702.868 ; perimeter
G1 X100.687 Y96.545 E3.00571 ; perimeter
G1 X101.348 Y96.746 E3.03666 ; perimeter
G1 X101.957 Y97.071 E3.06761 ; perimeter
G1 X102.402 Y97.437 E3.09343 ; perimeter
G1 X102.174 Y97.714 F4800.000 ; move to first perimeter point
G1 X102.235 Y97.765 E3.09698 F1532.581 ; perimeter
G1 X102.629 Y98.244 E3.12476 ; perimeter
G1 X102.921 Y98.790 E3.15254 ; perimeter
G1 X103.101 Y99.383 E3.18032 ; perimeter
G1 X103.161 Y100.000 E3.20810 ; perimeter
G1 X103.101 Y100.617 E3.23589 ; perimeter
G1 X102.921 Y101.210 E3.26367 ; perimeter
G1 X102.629 Y101.756 E3.29145 ; perimeter
G1 X102.235 Y102.235 E3.31923 ; perimeter
G1 X101.756 Y102.629 E3.34701 ; perimeter
G1 X101.210 Y102.921 E3.37479 ; perimeter
G1 X100.617 Y103.101 E3.40257 ; perimeter
G1 X100.000 Y103.161 E3.43035 ; perimeter
G1 X99.383 Y103.101 E3.45813 ; perimeter
G1 X98.790 Y102.921 E3.48591 ; perimeter
G1 X98.244 Y102.629 E3.51369 ; perimeter
G1 X97.765 Y102.235 E3.54147 ; perimeter
G1 X97.371 Y101.756 E3.56925 ; perimeter
G1 X97.079 Y101.210 E3.59704 ; perimeter
G1 X96.899 Y100.617 E3.62482 ; perimeter
G1 X96.861 Y100.230 E3.64222 ; perimeter
G1 X96.839 Y100.000 E3.65260 ; perimeter
G1 X96.899 Y99.383 E3.68038 ; perimeter
G1 X97.079 Y98.790 E3.70816 ; perimeter
G1 X97.371 Y98.244 E3.73594 ; perimeter
G1 X97.765 Y97.765 E3.76372 ; perimeter
G1 X98.244 Y97.371 E3.79150 ; perimeter
G1 X98.790 Y97.079 E3.81928 ; perimeter
G1 X99.383 Y96.899 E3.84706 ; perimeter
G1 X100.000 Y96.839 E3.87484 ; perimeter
G1 X100.386 Y96.877 E3.89225 ; perimeter
G1 X100.617 Y96.899 E3.90262 F1532.581 ; perimeter
G1 X101.210 Y97.079 E3.93041 ; perimeter
G1 X101.756 Y97.371 E3.95819 ; perimeter
G1 X102.116 Y97.667 E3.97905 ; perimeter
G1 X100.309 Y96.659 F4800.000 ; move inwards before travel
G1 X100.922 Y90.879 F4800.000 ; move to first perimeter point
G1 X109.121 Y90.879 E4.34659 F1702.868 ; perimeter
G1 X109.121 Y109.121 E5.16432 ; perimeter
G1 X90.879 Y109.121 E5.98204 F1702.868 ; perimeter
G1 X90.879 Y90.879 E6.79977 ; perimeter
G1 X100.847 Y90.879 E7.24659 ; perimeter
G1 X100.847 Y90.520 F4800.000 ; move to first perimeter point
G1 X109.480 Y90.520 E7.63360 F1702.868 ; perimeter
G1 X109.480 Y109.480 E8.48355 ; perimeter
G1 X90.520 Y109.480 E9.33350 ; perimeter
G1 X90.520 Y90.520 E10.18345 ; perimeter
G1 X100.772 Y90.520 E10.64302 F1702.868 ; perimeter
G1 X100.772 Y90.160 F4800.000 ; move to first perimeter point
G1 X109.840 Y90.160 E11.04951 F1532.581 ; perimeter
G1 X109.840 Y109.840 E11.93168 ; perimeter
G1 X90.160 Y109.840 E12.81385 F1532.581 ; perimeter
G1 X90.160 Y90.160 E13.69602 ; perimeter
G1 X100.697 Y90.160 E14.16834 ; perimeter
G1 X109.357 Y109.710 F4800.000 ; move inwards before travel
G1 X96.108 Y103.747 F4800.000 ; move to first fill point
G1 X96.041 Y103.814 E14.17264 F2554.302 ; fill
G1 X95.984 Y103.798 E14.17534 ; fill
G1 X96.749 Y103.106 F4800.000 ; move to first fill point
G1 X96.939 Y102.916 E14.18765 F2554.302 ; fill
G1 X96.883 Y102.708 E14.19749 ; fill
G1 X97.069 Y103.304 E14.22605 ; fill
G1 X97.198 Y103.175 E14.23442 ; fill
G1 X97.443 Y103.241 E14.24602 ; fill
G1 X102.121 Y103.546 F4800.000 ; move to first fill point
G1 X103.072 Y103.262 E14.29134 F2554.302 ; fill
G1 X103.262 Y103.072 E14.30364 ; fill
G1 X103.452 Y102.444 E14.33362 ; fill
G1 X103.423 Y102.335 E14.33880 ; fill
G1 X103.538 Y97.770 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X103.522 Y97.786 E14.34065 F3600.000 ; fill
G1 X103.140 Y97.352 E14.38791 ; fill
G1 X103.348 Y97.143 E14.41197 ; fill
G1 X102.773 Y96.901 E14.46287 ; fill
G1 X102.739 Y96.935 E14.46682 ; fill
M106 S255 ; enable fan
G1 X103.099 Y96.756 F4800.000 ; move to first fill point
G1 X103.106 Y96.749 E14.46729 F2554.302 ; fill
G1 X97.589 Y96.640 F4800.000 ; move to first fill point
G1 X97.410 Y96.592 E14.47576 F2554.302 ; fill
G1 X97.256 Y96.639 E14.48311 ; fill
G1 X96.639 Y97.256 E14.52301 ; fill
G1 X96.510 Y97.774 E14.54743 ; fill
G1 X96.497 Y97.725 E14.54979 ; fill
G1 X96.540 Y97.082 F4800.000 ; move to first fill point
G1 X91.121 Y102.500 E14.86629 F2554.302 ; fill
G1 X91.121 Y102.973 E14.88581 ; fill
G1 X96.334 Y97.760 E15.19029 ; fill
G1 X96.129 Y98.438 E15.21956 ; fill
G1 X91.121 Y103.445 E15.51203 ; fill
G1 X91.121 Y103.918 E15.53154 ; fill
G1 X95.923 Y99.116 E15.81199 ; fill
G1 X95.856 Y99.656 E15.83446 ; fill
G1 X91.121 Y104.390 E16.11098 ; fill
G1 X91.121 Y104.863 E16.13049 ; fill
G1 X95.836 Y100.148 E16.40589 ; fill
G1 X95.879 Y100.578 E16.42374 ; fill
G1 X91.121 Y105.335 E16.70161 ; fill
G1 X91.121 Y105.808 E16.72112 ; fill
G1 X95.951 Y100.978 E17.00324 ; fill
G1 X96.061 Y101.340 E17.01888 ; fill
G1 X91.121 Y106.280 E17.30742 ; fill
G1 X91.121 Y106.752 E17.32693 ; fill
G1 X96.171 Y101.703 E17.62189 ; fill
G1 X96.281 Y102.065 E17.63754 ; fill
G1 X91.121 Y107.225 E17.93892 ; fill
G1 X91.121 Y107.697 E17.95844 ; fill
G1 X96.391 Y102.428 E18.26624 ; fill
G1 X96.501 Y102.790 E18.28189 ; fill
G1 X91.121 Y108.170 E18.59611 ; fill
G1 X91.121 Y108.642 E18.61563 ; fill
G1 X95.596 Y104.168 E18.87699 ; fill
G1 X95.832 Y104.404 E18.89079 ; fill
G1 X91.358 Y108.879 E19.15216 ; fill
G1 X91.830 Y108.879 E19.17167 ; fill
G1 X97.210 Y103.499 E19.48590 ; fill
G1 X97.572 Y103.609 E19.50155 ; fill
G1 X92.303 Y108.879 E19.80935 ; fill
G1 X92.775 Y108.879 E19.82886 ; fill
G1 X97.935 Y103.719 E20.13025 ; fill
G1 X98.297 Y103.829 E20.14589 ; fill
G1 X93.248 Y108.879 E20.44085 ; fill
G1 X93.720 Y108.879 E20.46037 ; fill
G1 X98.660 Y103.939 E20.74890 ; fill
G1 X99.022 Y104.049 E20.76455 ; fill
G1 X94.192 Y108.879 E21.04666 ; fill
G1 X94.665 Y108.879 E21.06618 ; fill
G1 X99.422 Y104.121 E21.34405 ; fill
G1 X99.852 Y104.164 E21.36190 ; fill
G1 X95.137 Y108.879 E21.63729 ; fill
G1 X95.610 Y108.879 E21.65681 ; fill
G1 X100.344 Y104.144 E21.93333 ; fill
G1 X100.884 Y104.077 E21.95579 ; fill
G1 X96.082 Y108.879 E22.23624 ; fill
G1 X96.555 Y108.879 E22.25576 ; fill
G1 X101.562 Y103.871 E22.54823 ; fill
G1 X102.240 Y103.666 E22.57750 ; fill
G1 X97.027 Y108.879 E22.88198 ; fill
G1 X97.500 Y108.879 E22.90149 ; fill
G1 X102.918 Y103.460 E23.21799 ; fill
G1 X103.544 Y103.779 F4800.000 ; move to first fill point
G1 X98.445 Y108.879 E23.51582 F2554.302 ; fill
G1 X98.917 Y108.879 E23.53534 ; fill
G1 X103.682 Y104.114 E23.81365 ; fill
G1 X103.820 Y104.448 E23.82859 ; fill
G1 X99.389 Y108.879 E24.08739 ; fill
G1 X97.972 Y108.879 F4800.000 ; move to first fill point
G1 X108.879 Y97.972 E24.72443 F2554.302 ; fill
G1 X108.879 Y97.500 E24.74394 ; fill
G1 X103.460 Y102.918 E25.06044 ; fill
G1 X103.666 Y102.240 E25.08971 ; fill
G1 X108.879 Y97.027 E25.39420 ; fill
G1 X108.879 Y96.555 E25.41371 ; fill
G1 X103.871 Y101.562 E25.70618 ; fill
G1 X104.077 Y100.884 E25.73545 ; fill
G1 X108.879 Y96.082 E26.01590 ; fill
G1 X108.879 Y95.610 E26.03541 ; fill
G1 X104.144 Y100.344 E26.31194 ; fill
G1 X104.164 Y99.852 E26.33226 ; fill
G1 X108.879 Y95.137 E26.60766 ; fill
G1 X108.879 Y94.665 E26.62717 ; fill
G1 X104.121 Y99.422 E26.90504 ; fill
G1 X104.049 Y99.022 E26.92183 ; fill
G1 X108.879 Y94.192 E27.20394 ; fill
G1 X108.879 Y93.720 E27.22345 ; fill
G1 X104.089 Y98.509 E27.50318 ; fill
G1 X103.876 Y98.250 E27.51705 ; fill
G1 X108.879 Y93.248 E27.80921 ; fill
G1 X108.879 Y92.775 E27.82873 ; fill
G1 X103.719 Y97.935 E28.13011 ; fill
G1 X103.609 Y97.572 E28.14575 ; fill
G1 X108.879 Y92.303 E28.45356 ; fill
G1 X108.879 Y91.830 E28.47307 ; fill
G1 X103.499 Y97.210 E28.78730 ; fill
G1 X103.389 Y96.847 E28.80294 ; fill
G1 X103.780 Y96.456 E28.82580 ; fill
G1 X103.544 Y96.220 F4800.000 ; move to first fill point
G1 X103.153 Y96.611 E28.84865 F2554.302 ; fill
G1 X102.790 Y96.501 E28.86429 ; fill
G1 X108.170 Y91.121 E29.17852 ; fill
G1 X107.697 Y91.121 E29.19803 ; fill
G1 X102.428 Y96.391 E29.50584 ; fill
G1 X102.065 Y96.281 E29.52148 ; fill
G1 X107.225 Y91.121 E29.82287 ; fill
G1 X106.752 Y91.121 E29.84238 ; fill
G1 X101.703 Y96.171 E30.13734 ; fill
G1 X101.340 Y96.061 E30.15298 ; fill
G1 X106.280 Y91.121 E30.44152 ; fill
G1 X105.808 Y91.121 E30.46103 ; fill
G1 X100.978 Y95.951 E30.74315 ; fill
G1 X100.578 Y95.879 E30.75993 ; fill
G1 X105.335 Y91.121 E31.03780 ; fill
G1 X104.863 Y91.121 E31.05732 ; fill
G1 X100.148 Y95.836 E31.33271 ; fill
G1 X99.656 Y95.856 E31.35304 ; fill
G1 X104.390 Y91.121 E31.62956 ; fill
G1 X103.918 Y91.121 E31.64908 ; fill
G1 X99.116 Y95.923 E31.92953 ; fill
G1 X98.438 Y96.129 E31.95880 ; fill
G1 X103.445 Y91.121 E32.25127 ; fill
G1 X102.973 Y91.121 E32.27078 ; fill
G1 X97.760 Y96.334 E32.57526 ; fill
G1 X97.082 Y96.540 E32.60453 ; fill
G1 X102.500 Y91.121 E32.92103 ; fill
G1 X102.028 Y91.121 E32.94055 ; fill
G1 X91.121 Y102.028 E33.57758 ; fill
G1 X91.121 Y101.555 E33.59710 ; fill
G1 X96.221 Y96.456 E33.89493 ; fill
G1 X96.456 Y96.221 F4800.000 ; move to first fill point
G1 X101.555 Y91.121 E34.19276 F2554.302 ; fill
G1 X101.083 Y91.121 E34.21227 ; fill
G1 X96.318 Y95.886 E34.49059 ; fill
G1 X96.180 Y95.552 E34.50553 ; fill
G1 X100.611 Y91.121 E34.76433 ; fill
G1 X100.138 Y91.121 E34.78384 ; fill
G1 X91.121 Y100.138 E35.31050 ; fill
G1 X91.121 Y100.611 E35.33001 ; fill
G1 X95.552 Y96.180 E35.58882 ; fill
G1 X95.886 Y96.318 E35.60375 ; fill
G1 X91.121 Y101.083 E35.88207 ; fill
G1 X91.121 Y99.666 F4800.000 ; move to first fill point
G1 X99.666 Y91.121 E36.38113 F2554.302 ; fill
G1 X99.193 Y91.121 E36.40064 ; fill
G1 X91.121 Y99.193 E36.87211 ; fill
G1 X91.121 Y98.721 E36.89162 ; fill
G1 X98.721 Y91.121 E37.33549 ; fill
G1 X98.248 Y91.121 E37.35500 ; fill
G1 X91.121 Y98.248 E37.77127 ; fill
G1 X91.121 Y97.776 E37.79079 ; fill
G1 X97.776 Y91.121 E38.17946 ; fill
G1 X97.303 Y91.121 E38.19898 ; fill
G1 X91.121 Y97.303 E38.56006 ; fill
G1 X91.121 Y96.831 E38.57957 ; fill
G1 X96.831 Y91.121 E38.91305 ; fill
G1 X96.358 Y91.121 E38.93257 ; fill
G1 X91.121 Y96.358 E39.23846 ; fill
G1 X91.121 Y95.886 E39.25797 ; fill
G1 X95.886 Y91.121 E39.53626 ; fill
G1 X95.414 Y91.121 E39.55578 ; fill
G1 X91.121 Y95.414 E39.80647 ; fill
G1 X91.121 Y94.941 E39.82599 ; fill
G1 X94.941 Y91.121 E40.04909 ; fill
G1 X94.469 Y91.121 E40.06860 ; fill
G1 X91.121 Y94.469 E40.26411 ; fill
G1 X91.121 Y93.996 E40.28362 ; fill
G1 X93.996 Y91.121 E40.45153 ; fill
G1 X93.524 Y91.121 E40.47105 ; fill
G1 X91.121 Y93.524 E40.61136 ; fill
G1 X91.121 Y93.051 E40.63087 ; fill
G1 X93.051 Y91.121 E40.74359 ; fill
G1 X92.579 Y91.121 E40.76311 ; fill
G1 X91.121 Y92.579 E40.84823 ; fill
G1 X91.121 Y92.106 E40.86774 ; fill
G1 X92.106 Y91.121 E40.92527 ; fill
G1 X91.634 Y91.121 E40.94478 ; fill
G1 X91.121 Y91.634 E40.97472 ; fill
G1 X91.121 Y91.161 E40.99423 ; fill
G1 X91.161 Y91.121 E40.99656 ; fill
G1 X96.611 Y103.153 F4800.000 ; move to first fill point
G1 X96.220 Y103.544 E41.01942 F2554.302 ; fill
G1 X96.456 Y103.780 F4800.000 ; move to first fill point
G1 X96.847 Y103.389 E41.04227 F2554.302 ; fill
G1 X103.779 Y103.544 F4800.000 ; move to first fill point
G1 X108.879 Y98.445 E41.34010 F2554.302 ; fill
G1 X108.879 Y98.917 E41.35961 ; fill
G1 X104.114 Y103.682 E41.63793 ; fill
G1 X104.448 Y103.820 E41.65286 ; fill
G1 X108.879 Y99.389 E41.91167 ; fill
G1 X108.879 Y99.862 E41.93118 ; fill
G1 X99.862 Y108.879 E42.45783 ; fill
G1 X100.334 Y108.879 E42.47735 ; fill
G1 X108.879 Y100.334 E42.97641 ; fill
G1 X108.879 Y100.807 E42.99592 ; fill
G1 X100.807 Y108.879 E43.46738 ; fill
G1 X101.279 Y108.879 E43.48690 ; fill
G1 X108.879 Y101.279 E43.93076 ; fill
G1 X108.879 Y101.752 E43.95028 ; fill
G1 X101.752 Y108.879 E44.36655 ; fill
G1 X102.224 Y108.879 E44.38606 ; fill
G1 X108.879 Y102.224 E44.77474 ; fill
G1 X108.879 Y102.697 E44.79425 ; fill
G1 X102.697 Y108.879 E45.15533 ; fill
G1 X103.169 Y108.879 E45.17485 ; fill
G1 X108.879 Y103.169 E45.50833 ; fill
G1 X108.879 Y103.642 E45.52784 ; fill
G1 X103.642 Y108.879 E45.83373 ; fill
G1 X104.114 Y108.879 E45.85325 ; fill
G1 X108.879 Y104.114 E46.13154 ; fill
G1 X108.879 Y104.586 E46.15105 ; fill
G1 X104.586 Y108.879 E46.40175 ; fill
G1 X105.059 Y108.879 E46.42126 ; fill
G1 X108.879 Y105.059 E46.64437 ; fill
G1 X108.879 Y105.531 E46.66388 ; fill
G1 X105.531 Y108.879 E46.85939 ; fill
G1 X106.004 Y108.879 E46.87890 ; fill
G1 X108.879 Y106.004 E47.04681 ; fill
G1 X108.879 Y106.476 E47.06632 ; fill
G1 X106.476 Y108.879 E47.20664 ; fill
G1 X106.949 Y108.879 E47.22615 ; fill
G1 X108.879 Y106.949 E47.33887 ; fill
G1 X108.879 Y107.421 E47.35838 ; fill
G1 X107.421 Y108.879 E47.44351 ; fill
G1 X107.894 Y108.879 E47.46302 ; fill
G1 X108.879 Y107.894 E47.52055 ; fill
G1 X108.879 Y108.366 E47.54006 ; fill
G1 X108.366 Y108.879 E47.56999 ; fill
G1 X108.839 Y108.879 E47.58951 ; fill
G1 X108.879 Y108.839 E47.59184 ; fill
G1 X104.404 Y95.832 F4800.000 ; move to first fill point
G1 X108.879 Y91.358 E47.85321 F2554.302 ; fill
G1 X108.642 Y91.121 E47.86701 ; fill
G1 X104.168 Y95.596 E48.12837 ; fill
G1 F1800.000 E47.12837 ; retract
G92 E0 ; reset extrusion distance
G1 Z1.500 F4800.000 ; move to next layer (4)
G1 X102.746 Y97.254 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X103.229 Y97.842 E1.03413 F1707.327 ; perimeter
G1 X103.588 Y98.514 E1.06826 ; perimeter
G1 X103.809 Y99.242 E1.10238 ; perimeter
G1 X103.884 Y100.000 E1.13651 ; perimeter
G1 X103.809 Y100.758 E1.17064 ; perimeter
G1 X103.588 Y101.486 E1.20477 ; perimeter
G1 X103.229 Y102.158 E1.23890 ; perimeter
G1 X102.746 Y102.746 E1.27303 ; perimeter
G1 X102.158 Y103.229 E1.30715 ; perimeter
G1 X101.486 Y103.588 E1.34128 ; perimeter
G1 X100.758 Y103.809 E1.37541 ; perimeter
G1 X100.000 Y103.884 E1.40954 ; perimeter
G1 X99.242 Y103.809 E1.44367 ; perimeter
G1 X98.514 Y103.588 E1.47780 ; perimeter
G1 X97.842 Y103.229 E1.51192 ; perimeter
G1 X97.254 Y102.746 E1.54605 ; perimeter
G1 X96.771 Y102.158 E1.58018 ; perimeter
G1 X96.412 Y101.486 E1.61431 ; perimeter
G1 X96.191 Y100.758 E1.64844 ; perimeter
G1 X96.158 Y100.418 E1.66374 ; perimeter
G1 X96.116 Y100.000 E1.68257 ; perimeter
G1 X96.191 Y99.242 E1.71669 ; perimeter
G1 X96.412 Y98.514 E1.75082 ; perimeter
G1 X96.771 Y97.842 E1.78495 ; perimeter
G1 X97.254 Y97.254 E1.81908 ; perimeter
G1 X97.842 Y96.771 E1.85321 ; perimeter
G1 X98.514 Y96.412 E1.88733 ; perimeter
G1 X99.242 Y96.191 E1.92146 ; perimeter
G1 X100.000 Y96.116 E1.95559 ; perimeter
G1 X100.340 Y96.150 E1.97090 ; perimeter
G1 X100.758 Y96.191 E1.98972 F1707.327 ; perimeter
G1 X101.486 Y96.412 E2.02385 ; perimeter
G1 X102.158 Y96.771 E2.05798 ; perimeter
G1 X102.688 Y97.206 E2.08874 ; perimeter
G1 X102.460 Y97.484 F4800.000 ; move to first perimeter point
G1 X102.929 Y98.043 E2.12144 F1707.327 ; perimeter
G1 X103.254 Y98.652 E2.15239 ; perimeter
G1 X103.455 Y99.313 E2.18335 ; perimeter
G1 X103.522 Y100.000 E2.21430 ; perimeter
G1 X103.455 Y100.687 E2.24526 ; perimeter
G1 X103.254 Y101.348 E2.27621 ; perimeter
G1 X102.929 Y101.957 E2.30717 ; perimeter
G1 X102.491 Y102.491 E2.33812 ; perimeter
G1 X101.957 Y102.929 E2.36908 ; perimeter
G1 X101.348 Y103.254 E2.40003 ; perimeter
G1 X100.687 Y103.455 E2.43099 ; perimeter
G1 X100.000 Y103.522 E2.46194 ; perimeter
G1 X99.313 Y103.455 E2.49289 ; perimeter
G1 X98.652 Y103.254 E2.52385 ; perimeter
G1 X98.043 Y102.929 E2.55480 ; perimeter
G1 X97.509 Y102.491 E2.58576 ; perimeter
G1 X97.071 Y101.957 E2.61671 ; perimeter
G1 X96.746 Y101.348 E2.64767 ; perimeter
G1 X96.545 Y100.687 E2.67862 ; perimeter
G1 X96.478 Y100.000 E2.70958 ; perimeter
G1 X96.545 Y99.313 E2.74053 ; perimeter
G1 X96.746 Y98.652 E2.77149 ; perimeter
G1 X97.071 Y98.043 E2.80244 ; perimeter
G1 X97.509 Y97.509 E2.83339 ; perimeter
G1 X98.043 Y97.071 E2.86435 ; perimeter
G1 X98.652 Y96.746 E2.89530 ; perimeter
G1 X99.313 Y96.545 E2.92626 ; perimeter
G1 X99.617 Y96.515 E2.93998 ; perimeter
G1 X100.000 Y96.478 E2.95721 F1707.327 ; perimeter
G1 X100.687 Y96.545 E2.98817 ; perimeter
G1 X101.348 Y96.746 E3.01912 ; perimeter
G1 X101.957 Y97.071 E3.05008 ; perimeter
G1 X102.402 Y97.437 E3.07589 ; perimeter
G1 X102.174 Y97.714 F4800.000 ; move to first perimeter point
G1 X102.235 Y97.765 E3.07944 F1536.595 ; perimeter
G1 X102.629 Y98.244 E3.10722 ; perimeter
G1 X102.921 Y98.790 E3.13500 ; perimeter
G1 X103.101 Y99.383 E3.16279 ; perimeter
G1 X103.161 Y100.000 E3.19057 ; perimeter
G1 X103.101 Y100.617 E3.21835 ; perimeter
G1 X102.921 Y101.210 E3.24613 ; perimeter
G1 X102.629 Y101.756 E3.27391 ; perimeter
G1 X102.235 Y102.235 E3.30169 ; perimeter
G1 X101.756 Y102.629 E3.32947 ; perimeter
G1 X101.210 Y102.921 E3.35725 ; perimeter
G1 X100.617 Y103.101 E3.38503 ; perimeter
G1 X100.000 Y103.161 E3.41281 ; perimeter
G1 X99.383 Y103.101 E3.44059 ; perimeter
G1 X98.790 Y102.921 E3.46837 ; perimeter
G1 X98.244 Y102.629 E3.49616 ; perimeter
G1 X97.765 Y102.235 E3.52394 ; perimeter
G1 X97.371 Y101.756 E3.55172 ; perimeter
G1 X97.079 Y101.210 E3.57950 ; perimeter
G1 X96.899 Y100.617 E3.60728 ; perimeter
G1 X96.839 Y100.000 E3.63506 ; perimeter
G1 X96.899 Y99.383 E3.66284 ; perimeter
G1 X97.079 Y98.790 E3.69062 ; perimeter
G1 X97.371 Y98.244 E3.71840 ; perimeter
G1 X97.765 Y97.765 E3.74618 ; perimeter
G1 X98.244 Y97.371 E3.77396 ; perimeter
G1 X98.790 Y97.079 E3.80174 ; perimeter
G1 X99.383 Y96.899 E3.82952 ; perimeter
G1 X100.000 Y96.839 E3.85731 ; perimeter
G1 X100.269 Y96.865 E3.86944 ; perimeter
G1 X100.617 Y96.899 E3.88509 F1536.595 ; perimeter
G1 X101.210 Y97.079 E3.91287 ; perimeter
G1 X101.756 Y97.371 E3.94065 ; perimeter
G1 X102.116 Y97.667 E3.96152 ; perimeter
G1 X100.150 Y96.537 F4800.000 ; move inwards before travel
G1 X109.121 Y100.369 F4800.000 ; move to first perimeter point
G1 X109.121 Y109.121 E4.35384 F1707.327 ; perimeter
G1 X90.879 Y109.121 E5.17156 F1707.327 ; perimeter
G1 X90.879 Y90.879 E5.98929 ; perimeter
G1 X109.121 Y90.879 E6.80701 ; perimeter
G1 X109.121 Y100.294 E7.22905 ; perimeter
G1 X109.480 Y100.294 F4800.000 ; move to first perimeter point
G1 X109.480 Y109.480 E7.64085 F1707.327 ; perimeter
G1 X90.520 Y109.480 E8.49080 ; perimeter
G1 X90.520 Y90.520 E9.34075 ; perimeter
G1 X109.480 Y90.520 E10.19069 F1707.327 ; perimeter
G1 X109.480 Y100.219 E10.62548 ; perimeter
G1 X109.840 Y100.219 F4800.000 ; move to first perimeter point
G1 X109.840 Y109.840 E11.05675 F1536.595 ; perimeter
G1 X90.160 Y109.840 E11.93892 F1536.595 ; perimeter
G1 X90.160 Y90.160 E12.82110 ; perimeter
G1 X109.840 Y90.160 E13.70327 ; perimeter
G1 X109.840 Y100.144 E14.15080 ; perimeter
G1 X109.406 Y109.590 F4800.000 ; move inwards before travel
G1 X103.917 Y104.355 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X103.968 Y104.406 E14.15671 F3600.000 ; fill
G1 X104.406 Y103.968 E14.20723 ; fill
G1 X104.355 Y103.917 E14.21314 ; fill
M106 S255 ; enable fan
G1 X103.556 Y102.102 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X103.572 Y102.118 E14.21499 F3600.000 ; fill
G1 X103.137 Y102.652 E14.27123 ; fill
G1 X103.346 Y102.862 E14.29545 ; fill
G1 X102.862 Y103.346 E14.35140 ; fill
G1 X102.652 Y103.137 E14.37563 ; fill
G1 X102.118 Y103.572 E14.43186 ; fill
G1 X102.102 Y103.556 E14.43372 ; fill
M106 S255 ; enable fan
G1 F1800.000 E13.43372 ; retract
G92 E0 ; reset extrusion distance
G1 X103.130 Y96.756 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
M106 S76 ; enable fan
G1 X103.100 Y96.726 E1.00346 F3600.000 ; fill
M106 S255 ; enable fan
G1 X103.629 Y96.340 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X103.660 Y96.371 E1.00700 F3600.000 ; fill
G1 X104.339 Y95.950 E1.07219 ; fill
G1 X104.050 Y95.661 E1.10550 ; fill
M106 S255 ; enable fan
G1 X97.882 Y96.428 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X97.898 Y96.444 E1.10735 F3600.000 ; fill
G1 X97.348 Y96.863 E1.16381 ; fill
G1 X97.138 Y96.654 E1.18803 ; fill
G1 X96.654 Y97.138 E1.24398 ; fill
G1 X96.863 Y97.348 E1.26820 ; fill
G1 X96.428 Y97.882 E1.32444 ; fill
G1 X96.444 Y97.898 E1.32629 ; fill
M106 S255 ; enable fan
G1 X95.594 Y96.032 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X95.645 Y96.083 E1.33220 F3600.000 ; fill
G1 X96.083 Y95.645 E1.38272 ; fill
G1 X96.032 Y95.594 E1.38862 ; fill
M106 S255 ; enable fan
G1 X96.444 Y102.102 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X96.493 Y102.151 E1.39425 F3600.000 ; fill
M106 S255 ; enable fan
G1 X97.849 Y103.507 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X97.898 Y103.556 E1.39987 F3600.000 ; fill
M106 S255 ; enable fan
G1 X96.340 Y103.629 F4800.000 ; move to first fill point
M106 S76 ; enable fan
G1 X96.371 Y103.660 E1.40340 F3600.000 ; fill
G1 X95.950 Y104.339 E1.46860 ; fill
G1 X95.661 Y104.050 E1.50191 ; fill
M106 S255 ; enable fan
G1 X95.552 Y103.820 F4800.000 ; move to first fill point
G1 X91.121 Y99.389 E1.76071 F2560.991 ; fill
G1 X91.121 Y98.917 E1.78023 ; fill
G1 X95.886 Y103.682 E2.05854 ; fill
G1 X96.221 Y103.544 F4800.000 ; move to first fill point
G1 X91.121 Y98.445 E2.35637 F2560.991 ; fill
G1 X91.121 Y97.972 E2.37589 ; fill
G1 X102.028 Y108.879 E3.01292 ; fill
G1 X102.500 Y108.879 E3.03244 ; fill
G1 X97.082 Y103.460 E3.34894 ; fill
G1 X97.760 Y103.666 E3.37821 ; fill
G1 X102.973 Y108.879 E3.68269 ; fill
G1 X103.445 Y108.879 E3.70220 ; fill
G1 X98.438 Y103.871 E3.99467 ; fill
G1 X99.116 Y104.077 E4.02394 ; fill
G1 X103.918 Y108.879 E4.30439 ; fill
G1 X104.390 Y108.879 E4.32391 ; fill
G1 X99.656 Y104.144 E4.60043 ; fill
G1 X100.148 Y104.164 E4.62076 ; fill
G1 X104.863 Y108.879 E4.89616 ; fill
G1 X105.335 Y108.879 E4.91567 ; fill
G1 X100.578 Y104.121 E5.19354 ; fill
G1 X100.978 Y104.049 E5.21032 ; fill
G1 X105.808 Y108.879 E5.49244 ; fill
G1 X106.280 Y108.879 E5.51195 ; fill
G1 X101.340 Y103.939 E5.80049 ; fill
G1 X101.703 Y103.829 E5.81613 ; fill
G1 X106.752 Y108.879 E6.11109 ; fill
G1 X107.225 Y108.879 E6.13061 ; fill
G1 X102.065 Y103.719 E6.43199 ; fill
G1 X102.428 Y103.609 E6.44763 ; fill
G1 X107.697 Y108.879 E6.75544 ; fill
G1 X108.879 Y108.642 F4800.000 ; move to first fill point
G1 X104.404 Y104.168 E7.01681 F2560.991 ; fill
G1 X104.168 Y104.404 E7.03060 ; fill
G1 X108.642 Y108.879 E7.29197 ; fill
G1 X108.170 Y108.879 E7.31149 ; fill
G1 X102.790 Y103.499 E7.62571 ; fill
G1 X103.153 Y103.389 E7.64136 ; fill
G1 X103.544 Y103.780 E7.66421 ; fill
G1 X103.780 Y103.544 F4800.000 ; move to first fill point
G1 X103.389 Y103.153 E7.68706 F2560.991 ; fill
G1 X103.499 Y102.790 E7.70270 ; fill
G1 X108.879 Y108.170 E8.01693 ; fill
G1 X108.879 Y107.697 E8.03644 ; fill
G1 X103.609 Y102.428 E8.34425 ; fill
G1 X103.719 Y102.065 E8.35990 ; fill
G1 X108.879 Y107.225 E8.66128 ; fill
G1 X108.879 Y106.752 E8.68079 ; fill
G1 X103.775 Y101.649 E8.97886 ; fill
G1 X103.898 Y101.299 E8.99418 ; fill
G1 X108.879 Y106.280 E9.28511 ; fill
G1 X108.879 Y105.808 E9.30462 ; fill
G1 X104.008 Y100.937 E9.58912 ; fill
G1 X104.075 Y100.531 E9.60610 ; fill
G1 X108.879 Y105.335 E9.88669 ; fill
G1 X108.879 Y104.863 E9.90621 ; fill
G1 X104.117 Y100.101 E10.18433 ; fill
G1 X104.087 Y99.599 E10.20510 ; fill
G1 X108.879 Y104.390 E10.48494 ; fill
G1 X108.879 Y103.918 E10.50445 ; fill
G1 X104.001 Y99.040 E10.78937 ; fill
G1 X103.765 Y98.332 E10.82017 ; fill
G1 X108.879 Y103.445 E11.11882 ; fill
G1 X108.879 Y102.973 E11.13833 ; fill
G1 X102.806 Y96.901 E11.49299 ; fill
G1 X102.918 Y96.540 F4800.000 ; move to first fill point
G1 X97.500 Y91.121 E11.80949 F2560.991 ; fill
G1 X97.972 Y91.121 E11.82900 ; fill
G1 X108.879 Y102.028 E12.46604 ; fill
G1 X108.879 Y102.500 F4800.000 ; move to first fill point
G1 X103.279 Y96.901 E12.79311 F2560.991 ; fill
G1 X103.779 Y96.456 F4800.000 ; move to first fill point
G1 X108.879 Y101.555 E13.09094 F2560.991 ; fill
G1 X108.879 Y101.083 E13.11045 ; fill
G1 X104.114 Y96.318 E13.38877 ; fill
G1 X104.448 Y96.180 E13.40371 ; fill
G1 X108.879 Y100.611 E13.66251 ; fill
G1 X103.544 Y96.221 F4800.000 ; move to first fill point
G1 X98.445 Y91.121 E13.96034 F2560.991 ; fill
G1 X98.917 Y91.121 E13.97986 ; fill
G1 X103.682 Y95.886 E14.25817 ; fill
G1 X103.820 Y95.552 E14.27311 ; fill
G1 X99.389 Y91.121 E14.53191 ; fill
G1 X99.862 Y91.121 E14.55143 ; fill
G1 X108.879 Y100.138 E15.07808 ; fill
G1 X108.879 Y99.666 E15.09759 ; fill
G1 X100.334 Y91.121 E15.59665 ; fill
G1 X100.807 Y91.121 E15.61617 ; fill
G1 X108.879 Y99.193 E16.08763 ; fill
G1 X108.879 Y98.721 E16.10714 ; fill
G1 X101.279 Y91.121 E16.55101 ; fill
G1 X101.752 Y91.121 E16.57052 ; fill
G1 X108.879 Y98.248 E16.98680 ; fill
G1 X108.879 Y97.776 E17.00631 ; fill
G1 X102.224 Y91.121 E17.39499 ; fill
G1 X102.697 Y91.121 E17.41450 ; fill
G1 X108.879 Y97.303 E17.77558 ; fill
G1 X108.879 Y96.831 E17.79509 ; fill
G1 X103.169 Y91.121 E18.12858 ; fill
G1 X103.642 Y91.121 E18.14809 ; fill
G1 X108.879 Y96.358 E18.45398 ; fill
G1 X108.879 Y95.886 E18.47349 ; fill
G1 X104.114 Y91.121 E18.75179 ; fill
G1 X104.586 Y91.121 E18.77130 ; fill
G1 X108.879 Y95.414 E19.02200 ; fill
G1 X108.879 Y94.941 E19.04151 ; fill
G1 X105.059 Y91.121 E19.26461 ; fill
G1 X105.531 Y91.121 E19.28413 ; fill
G1 X108.879 Y94.469 E19.47963 ; fill
G1 X108.879 Y93.996 E19.49914 ; fill
G1 X106.004 Y91.121 E19.66706 ; fill
G1 X106.476 Y91.121 E19.68657 ; fill
G1 X108.879 Y93.524 E19.82688 ; fill
G1 X108.879 Y93.051 E19.84640 ; fill
G1 X106.949 Y91.121 E19.95912 ; fill
G1 X107.421 Y91.121 E19.97863 ; fill
G1 X108.879 Y92.579 E20.06375 ; fill
G1 X108.879 Y92.106 E20.08327 ; fill
G1 X107.894 Y91.121 E20.14079 ; fill
G1 X108.366 Y91.121 E20.16031 ; fill
G1 X108.879 Y91.634 E20.19024 ; fill
G1 X108.879 Y91.161 E20.20975 ; fill
G1 X108.839 Y91.121 E20.21209 ; fill
G1 X97.027 Y91.121 F4800.000 ; move to first fill point
G1 X102.240 Y96.334 E20.51657 F2560.991 ; fill
G1 X101.562 Y96.129 E20.54584 ; fill
G1 X96.555 Y91.121 E20.83831 ; fill
G1 X96.082 Y91.121 E20.85782 ; fill
G1 X100.884 Y95.923 E21.13827 ; fill
G1 X100.344 Y95.856 E21.16074 ; fill
G1 X95.610 Y91.121 E21.43726 ; fill
G1 X95.137 Y91.121 E21.45677 ; fill
G1 X99.852 Y95.836 E21.73217 ; fill
G1 X99.422 Y95.879 E21.75002 ; fill
G1 X94.665 Y91.121 E22.02789 ; fill
G1 X94.192 Y91.121 E22.04740 ; fill
G1 X99.022 Y95.951 E22.32952 ; fill
G1 X98.660 Y96.061 E22.34516 ; fill
G1 X93.720 Y91.121 E22.63370 ; fill
G1 X93.248 Y91.121 E22.65321 ; fill
G1 X98.297 Y96.171 E22.94817 ; fill
G1 X97.935 Y96.281 E22.96382 ; fill
G1 X92.775 Y91.121 E23.26520 ; fill
G1 X92.303 Y91.121 E23.28471 ; fill
G1 X97.572 Y96.391 E23.59252 ; fill
G1 X96.611 Y96.847 F4800.000 ; move to first fill point
G1 X96.220 Y96.456 E23.61537 F2560.991 ; fill
G1 X96.456 Y96.220 F4800.000 ; move to first fill point
G1 X96.847 Y96.611 E23.63822 F2560.991 ; fill
G1 X97.210 Y96.501 E23.65387 ; fill
G1 X91.830 Y91.121 E23.96810 ; fill
G1 X91.358 Y91.121 E23.98761 ; fill
G1 X95.832 Y95.596 E24.24898 ; fill
G1 X95.596 Y95.832 E24.26278 ; fill
G1 X91.121 Y91.358 E24.52414 ; fill
G1 X91.121 Y91.830 E24.54366 ; fill
G1 X96.501 Y97.210 E24.85789 ; fill
G1 X96.391 Y97.572 E24.87353 ; fill
G1 X91.121 Y92.303 E25.18134 ; fill
G1 X91.121 Y92.775 E25.20085 ; fill
G1 X96.281 Y97.935 E25.50223 ; fill
G1 X96.171 Y98.297 E25.51788 ; fill
G1 X91.121 Y93.248 E25.81284 ; fill
G1 X91.121 Y93.720 E25.83235 ; fill
G1 X96.061 Y98.660 E26.12089 ; fill
G1 X95.951 Y99.022 E26.13653 ; fill
G1 X91.121 Y94.192 E26.41865 ; fill
G1 X91.121 Y94.665 E26.43816 ; fill
G1 X95.879 Y99.422 E26.71603 ; fill
G1 X95.836 Y99.852 E26.73388 ; fill
G1 X91.121 Y95.137 E27.00928 ; fill
G1 X91.121 Y95.610 E27.02879 ; fill
G1 X95.856 Y100.344 E27.30532 ; fill
G1 X95.923 Y100.884 E27.32778 ; fill
G1 X91.121 Y96.082 E27.60823 ; fill
G1 X91.121 Y96.555 E27.62774 ; fill
G1 X96.129 Y101.562 E27.92021 ; fill
G1 X96.334 Y102.240 E27.94948 ; fill
G1 X91.121 Y97.027 E28.25396 ; fill
G1 X91.121 Y97.500 E28.27348 ; fill
G1 X96.540 Y102.918 E28.58998 ; fill
G1 X96.456 Y103.779 F4800.000 ; move to first fill point
G1 X101.555 Y108.879 E28.88781 F2560.991 ; fill
G1 X101.083 Y108.879 E28.90732 ; fill
G1 X96.318 Y104.114 E29.18564 ; fill
G1 X96.180 Y104.448 E29.20057 ; fill
G1 X100.611 Y108.879 E29.45938 ; fill
G1 X100.138 Y108.879 E29.47889 ; fill
G1 X91.121 Y99.862 E30.00555 ; fill
G1 X91.121 Y100.334 E30.02506 ; fill
G1 X99.666 Y108.879 E30.52412 ; fill
G1 X99.193 Y108.879 E30.54363 ; fill
G1 X91.121 Y100.807 E31.01509 ; fill
G1 X91.121 Y101.279 E31.03461 ; fill
G1 X98.721 Y108.879 E31.47848 ; fill
G1 X98.248 Y108.879 E31.49799 ; fill
G1 X91.121 Y101.752 E31.91426 ; fill
G1 X91.121 Y102.224 E31.93377 ; fill
G1 X97.776 Y108.879 E32.32245 ; fill
G1 X97.303 Y108.879 E32.34196 ; fill
G1 X91.121 Y102.697 E32.70304 ; fill
G1 X91.121 Y103.169 E32.72256 ; fill
G1 X96.831 Y108.879 E33.05604 ; fill
G1 X96.358 Y108.879 E33.07555 ; fill
G1 X91.121 Y103.642 E33.38144 ; fill
G1 X91.121 Y104.114 E33.40096 ; fill
G1 X95.886 Y108.879 E33.67925 ; fill
G1 X95.414 Y108.879 E33.69876 ; fill
G1 X91.121 Y104.586 E33.94946 ; fill
G1 X91.121 Y105.059 E33.96897 ; fill
G1 X94.941 Y108.879 E34.19208 ; fill
G1 X94.469 Y108.879 E34.21159 ; fill
G1 X91.121 Y105.531 E34.40710 ; fill
G1 X91.121 Y106.004 E34.42661 ; fill
G1 X93.996 Y108.879 E34.59452 ; fill
G1 X93.524 Y108.879 E34.61403 ; fill
G1 X91.121 Y106.476 E34.75435 ; fill
G1 X91.121 Y106.949 E34.77386 ; fill
G1 X93.051 Y108.879 E34.88658 ; fill
G1 X92.579 Y108.879 E34.90609 ; fill
G1 X91.121 Y107.421 E34.99122 ; fill
G1 X91.121 Y107.894 E35.01073 ; fill
G1 X92.106 Y108.879 E35.06826 ; fill
G1 X91.634 Y108.879 E35.08777 ; fill
G1 X91.121 Y108.366 E35.11770 ; fill
G1 X91.121 Y108.839 E35.13721 ; fill
G1 X91.161 Y108.879 E35.13955 ; fill
G1 F1800.000 E34.13955 ; retract
G92 E0 ; reset extrusion distance
G1 Z1.800 F4800.000 ; move to next layer (5)
G1 X97.254 Y102.746 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X96.771 Y102.158 E1.03413 F1716.145 ; perimeter
G1 X96.412 Y101.486 E1.06826 ; perimeter
G1 X96.191 Y100.758 E1.10238 ; perimeter
G1 X96.116 Y100.000 E1.13651 ; perimeter
G1 X96.191 Y99.242 E1.17064 ; perimeter
G1 X96.412 Y98.514 E1.20477 ; perimeter
G1 X96.771 Y97.842 E1.23890 ; perimeter
G1 X97.254 Y97.254 E1.27303 ; perimeter
G1 X97.842 Y96.771 E1.30715 ; perimeter
G1 X98.514 Y96.412 E1.34128 ; perimeter
G1 X99.242 Y96.191 E1.37541 ; perimeter
G1 X100.000 Y96.116 E1.40954 ; perimeter
G1 X100.223 Y96.138 E1.41957 ; perimeter
G1 X100.758 Y96.191 E1.44367 F1716.145 ; perimeter
G1 X101.486 Y96.412 E1.47780 ; perimeter
G1 X102.158 Y96.771 E1.51192 ; perimeter
G1 X102.746 Y97.254 E1.54605 ; perimeter
G1 X103.229 Y97.842 E1.58018 ; perimeter
G1 X103.588 Y98.514 E1.61431 ; perimeter
G1 X103.809 Y99.242 E1.64844 ; perimeter
G1 X103.884 Y100.000 E1.68257 ; perimeter
G1 X103.809 Y100.758 E1.71669 ; perimeter
G1 X103.588 Y101.486 E1.75082 ; perimeter
G1 X103.229 Y102.158 E1.78495 ; perimeter
G1 X102.746 Y102.746 E1.81908 ; perimeter
G1 X102.158 Y103.229 E1.85321 ; perimeter
G1 X101.486 Y103.588 E1.88734 ; perimeter
G1 X100.758 Y103.809 E1.92146 ; perimeter
G1 X100.000 Y103.884 E1.95559 ; perimeter
G1 X99.242 Y103.809 E1.98972 ; perimeter
G1 X98.514 Y103.588 E2.02385 ; perimeter
G1 X97.842 Y103.229 E2.05798 ; perimeter
G1 X97.312 Y102.794 E2.08874 ; perimeter
G1 X97.540 Y102.516 F4800.000 ; move to first perimeter point
G1 X97.071 Y101.957 E2.12144 F1716.145 ; perimeter
G1 X96.746 Y101.348 E2.15239 ; perimeter
G1 X96.545 Y100.687 E2.18335 ; perimeter
G1 X96.478 Y100.000 E2.21430 ; perimeter
G1 X96.545 Y99.313 E2.24526 ; perimeter
G1 X96.746 Y98.652 E2.27621 ; perimeter
G1 X97.071 Y98.043 E2.30717 ; perimeter
G1 X97.509 Y97.509 E2.33812 ; perimeter
G1 X98.043 Y97.071 E2.36908 ; perimeter
G1 X98.652 Y96.746 E2.40003 ; perimeter
G1 X99.313 Y96.545 E2.43098 ; perimeter
G1 X99.500 Y96.527 E2.43943 ; perimeter
G1 X100.000 Y96.478 E2.46194 F1716.145 ; perimeter
G1 X100.687 Y96.545 E2.49289 ; perimeter
G1 X101.348 Y96.746 E2.52385 ; perimeter
G1 X101.957 Y97.071 E2.55480 ; perimeter
G1 X102.491 Y97.509 E2.58576 ; perimeter
G1 X102.929 Y98.043 E2.61671 ; perimeter
G1 X103.254 Y98.652 E2.64767 ; perimeter
G1 X103.455 Y99.313 E2.67862 ; perimeter
G1 X103.522 Y100.000 E2.70958 ; perimeter
G1 X103.455 Y100.687 E2.74053 ; perimeter
G1 X103.254 Y101.348 E2.77149 ; perimeter
G1 X102.929 Y101.957 E2.80244 ; perimeter
G1 X102.491 Y102.491 E2.83339 ; perimeter
G1 X102.345 Y102.610 E2.84184 ; perimeter
G1 X101.957 Y102.929 E2.86435 ; perimeter
G1 X101.348 Y103.254 E2.89530 ; perimeter
G1 X100.687 Y103.455 E2.92626 ; perimeter
G1 X100.000 Y103.522 E2.95721 ; perimeter
G1 X99.313 Y103.455 E2.98817 ; perimeter
G1 X98.652 Y103.254 E3.01912 ; perimeter
G1 X98.043 Y102.929 E3.05008 ; perimeter
G1 X97.598 Y102.563 E3.07589 ; perimeter
G1 X97.826 Y102.286 F4800.000 ; move to first perimeter point
G1 X97.765 Y102.235 E3.07944 F1544.531 ; perimeter
G1 X97.371 Y101.756 E3.10722 ; perimeter
G1 X97.079 Y101.210 E3.13500 ; perimeter
G1 X96.899 Y100.617 E3.16279 ; perimeter
G1 X96.839 Y100.000 E3.19057 ; perimeter
G1 X96.899 Y99.383 E3.21835 ; perimeter
G1 X97.079 Y98.790 E3.24613 ; perimeter
G1 X97.371 Y98.244 E3.27391 ; perimeter
G1 X97.765 Y97.765 E3.30169 ; perimeter
G1 X98.244 Y97.371 E3.32947 ; perimeter
G1 X98.790 Y97.079 E3.35725 ; perimeter
G1 X99.383 Y96.899 E3.38503 ; perimeter
G1 X100.000 Y96.839 E3.41281 ; perimeter
G1 X100.152 Y96.854 E3.41967 ; perimeter
G1 X100.617 Y96.899 E3.44059 F1544.531 ; perimeter
G1 X101.210 Y97.079 E3.46837 ; perimeter
G1 X101.756 Y97.371 E3.49615 ; perimeter
G1 X102.235 Y97.765 E3.52394 ; perimeter
G1 X102.629 Y98.244 E3.55172 ; perimeter
G1 X102.921 Y98.790 E3.57950 ; perimeter
G1 X103.101 Y99.383 E3.60728 ; perimeter
G1 X103.161 Y100.000 E3.63506 ; perimeter
G1 X103.101 Y100.617 E3.66284 ; perimeter
G1 X102.921 Y101.210 E3.69062 ; perimeter
G1 X102.629 Y101.756 E3.71840 ; perimeter
G1 X102.235 Y102.235 E3.74618 ; perimeter
G1 X102.117 Y102.332 E3.75304 ; perimeter
G1 X101.756 Y102.629 E3.77396 ; perimeter
G1 X101.210 Y102.921 E3.80174 ; perimeter
G1 X100.617 Y103.101 E3.82952 ; perimeter
G1 X100.000 Y103.161 E3.85731 ; perimeter
G1 X99.383 Y103.101 E3.88509 ; perimeter
G1 X98.790 Y102.921 E3.91287 ; perimeter
G1 X98.244 Y102.629 E3.94065 ; perimeter
G1 X97.884 Y102.333 E3.96152 ; perimeter
G1 F1800.000 E2.96152 ; retract
G92 E0 ; reset extrusion distance
G1 X100.232 Y96.394 F4800.000 ; move inwards before travel
G1 X90.879 Y100.472 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X90.879 Y90.879 E1.43002 F1716.145 ; perimeter
G1 X109.121 Y90.879 E2.24774 ; perimeter
G1 X109.121 Y109.121 E3.06547 ; perimeter
G1 X90.879 Y109.121 E3.88319 F1716.145 ; perimeter
G1 X90.879 Y100.547 E4.26754 ; perimeter
G1 X90.520 Y100.547 F4800.000 ; move to first perimeter point
G1 X90.520 Y90.520 E4.71703 F1716.145 ; perimeter
G1 X109.480 Y90.520 E5.56698 F1716.145 ; perimeter
G1 X109.480 Y109.480 E6.41693 ; perimeter
G1 X90.520 Y109.480 E7.26687 ; perimeter
G1 X90.520 Y100.622 E7.66397 ; perimeter
G1 X90.160 Y100.622 F4800.000 ; move to first perimeter point
G1 X90.160 Y90.160 E8.13293 F1544.531 ; perimeter
G1 X109.840 Y90.160 E9.01510 ; perimeter
G1 X109.840 Y109.840 E9.89728 ; perimeter
G1 X90.160 Y109.840 E10.77945 F1544.531 ; perimeter
G1 X90.160 Y100.697 E11.18929 ; perimeter
G1 F1800.000 E10.18929 ; retract
G92 E0 ; reset extrusion distance
G1 X110.090 Y109.406 F4800.000 ; move inwards before travel
G1 X108.879 Y108.839 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X108.839 Y108.879 E1.00234 F2574.218 ; fill
G1 X108.366 Y108.879 E1.02185 ; fill
G1 X108.879 Y108.366 E1.05178 ; fill
G1 X108.879 Y107.894 E1.07129 ; fill
G1 X107.894 Y108.879 E1.12882 ; fill
G1 X107.421 Y108.879 E1.14834 ; fill
G1 X108.879 Y107.421 E1.23346 ; fill
G1 X108.879 Y106.949 E1.25297 ; fill
G1 X106.949 Y108.879 E1.36569 ; fill
G1 X106.476 Y108.879 E1.38520 ; fill
G1 X108.879 Y106.476 E1.52552 ; fill
G1 X108.879 Y106.004 E1.54503 ; fill
G1 X106.004 Y108.879 E1.71294 ; fill
G1 X105.531 Y108.879 E1.73246 ; fill
G1 X108.879 Y105.531 E1.92796 ; fill
G1 X108.879 Y105.059 E1.94748 ; fill
G1 X105.059 Y108.879 E2.17058 ; fill
G1 X104.586 Y108.879 E2.19009 ; fill
G1 X108.879 Y104.586 E2.44079 ; fill
G1 X108.879 Y104.114 E2.46030 ; fill
G1 X104.114 Y108.879 E2.73860 ; fill
G1 X103.642 Y108.879 E2.75811 ; fill
G1 X108.879 Y103.642 E3.06400 ; fill
G1 X108.879 Y103.169 E3.08351 ; fill
G1 X103.169 Y108.879 E3.41700 ; fill
G1 X102.697 Y108.879 E3.43651 ; fill
G1 X108.879 Y102.697 E3.79759 ; fill
G1 X108.879 Y102.224 E3.81710 ; fill
G1 X102.224 Y108.879 E4.20578 ; fill
G1 X101.752 Y108.879 E4.22529 ; fill
G1 X108.879 Y101.752 E4.64156 ; fill
G1 X108.879 Y101.279 E4.66108 ; fill
G1 X101.279 Y108.879 E5.10495 ; fill
G1 X100.807 Y108.879 E5.12446 ; fill
G1 X108.879 Y100.807 E5.59592 ; fill
G1 X108.879 Y100.334 E5.61544 ; fill
G1 X100.334 Y108.879 E6.11449 ; fill
G1 X99.862 Y108.879 E6.13401 ; fill
G1 X108.879 Y99.862 E6.66066 ; fill
G1 X108.879 Y99.389 E6.68018 ; fill
G1 X99.389 Y108.879 E7.23443 ; fill
G1 X98.917 Y108.879 E7.25394 ; fill
G1 X108.879 Y98.917 E7.83579 ; fill
G1 X108.879 Y98.445 E7.85530 ; fill
G1 X98.445 Y108.879 E8.46474 ; fill
G1 X97.972 Y108.879 E8.48425 ; fill
G1 X108.879 Y97.972 E9.12129 ; fill
G1 X108.879 Y97.500 E9.14080 ; fill
G1 X97.500 Y108.879 E9.80544 ; fill
G1 X97.027 Y108.879 E9.82495 ; fill
G1 X108.879 Y97.027 E10.51718 ; fill
G1 X108.879 Y96.555 E10.53669 ; fill
G1 X103.765 Y101.668 E10.83534 ; fill
G1 X104.001 Y100.960 E10.86614 ; fill
G1 X108.879 Y96.082 E11.15105 ; fill
G1 X108.879 Y95.610 E11.17057 ; fill
G1 X104.087 Y100.401 E11.45041 ; fill
G1 X104.117 Y99.899 E11.47118 ; fill
G1 X108.879 Y95.137 E11.74930 ; fill
G1 X108.879 Y94.665 E11.76882 ; fill
G1 X104.075 Y99.469 E12.04941 ; fill
G1 X104.008 Y99.063 E12.06639 ; fill
G1 X108.879 Y94.192 E12.35089 ; fill
G1 X108.879 Y93.720 E12.37040 ; fill
G1 X103.898 Y98.701 E12.66133 ; fill
G1 X103.775 Y98.351 E12.67664 ; fill
G1 X108.879 Y93.248 E12.97472 ; fill
G1 X108.879 Y92.775 E12.99423 ; fill
G1 X103.611 Y98.043 E13.30192 ; fill
G1 X103.446 Y97.735 E13.31633 ; fill
G1 X108.879 Y92.303 E13.63363 ; fill
G1 X108.879 Y91.830 E13.65315 ; fill
G1 X103.238 Y97.471 E13.98263 ; fill
G1 X103.025 Y97.212 E13.99649 ; fill
G1 X108.879 Y91.358 E14.33841 ; fill
G1 X108.642 Y91.121 E14.35221 ; fill
G1 X102.788 Y96.975 E14.69413 ; fill
G1 X102.529 Y96.762 E14.70800 ; fill
G1 X108.170 Y91.121 E15.03748 ; fill
G1 X107.697 Y91.121 E15.05699 ; fill
G1 X102.265 Y96.554 E15.37429 ; fill
G1 X101.957 Y96.389 E15.38871 ; fill
G1 X107.225 Y91.121 E15.69639 ; fill
G1 X106.752 Y91.121 E15.71591 ; fill
G1 X101.649 Y96.225 E16.01398 ; fill
G1 X101.299 Y96.102 E16.02930 ; fill
G1 X106.280 Y91.121 E16.32022 ; fill
G1 X105.808 Y91.121 E16.33974 ; fill
G1 X100.937 Y95.992 E16.62424 ; fill
G1 X100.531 Y95.925 E16.64121 ; fill
G1 X105.335 Y91.121 E16.92181 ; fill
G1 X104.863 Y91.121 E16.94132 ; fill
G1 X100.101 Y95.883 E17.21944 ; fill
G1 X99.599 Y95.913 E17.24021 ; fill
G1 X104.390 Y91.121 E17.52006 ; fill
G1 X103.918 Y91.121 E17.53957 ; fill
G1 X99.040 Y95.999 E17.82449 ; fill
G1 X98.332 Y96.235 E17.85528 ; fill
G1 X103.445 Y91.121 E18.15393 ; fill
G1 X102.973 Y91.121 E18.17344 ; fill
G1 X91.121 Y102.973 E18.86567 ; fill
G1 X91.121 Y103.445 E18.88519 ; fill
G1 X96.235 Y98.332 E19.18384 ; fill
G1 X95.999 Y99.040 E19.21463 ; fill
G1 X91.121 Y103.918 E19.49955 ; fill
G1 X91.121 Y104.390 E19.51906 ; fill
G1 X95.913 Y99.599 E19.79891 ; fill
G1 X95.883 Y100.101 E19.81967 ; fill
G1 X91.121 Y104.863 E20.09780 ; fill
G1 X91.121 Y105.335 E20.11731 ; fill
G1 X95.925 Y100.531 E20.39790 ; fill
G1 X95.992 Y100.937 E20.41488 ; fill
G1 X91.121 Y105.808 E20.69938 ; fill
G1 X91.121 Y106.280 E20.71890 ; fill
G1 X96.102 Y101.299 E21.00982 ; fill
G1 X96.225 Y101.649 E21.02514 ; fill
G1 X91.121 Y106.752 E21.32321 ; fill
G1 X91.121 Y107.225 E21.34272 ; fill
G1 X96.389 Y101.957 E21.65041 ; fill
G1 X96.554 Y102.265 E21.66483 ; fill
G1 X91.121 Y107.697 E21.98213 ; fill
G1 X91.121 Y108.170 E22.00164 ; fill
G1 X96.762 Y102.529 E22.33112 ; fill
G1 X96.975 Y102.788 E22.34499 ; fill
G1 X91.121 Y108.642 E22.68691 ; fill
G1 X91.358 Y108.879 E22.70070 ; fill
G1 X97.212 Y103.025 E23.04263 ; fill
G1 X97.471 Y103.238 E23.05649 ; fill
G1 X91.830 Y108.879 E23.38597 ; fill
G1 X92.303 Y108.879 E23.40549 ; fill
G1 X97.735 Y103.446 E23.72278 ; fill
G1 X98.043 Y103.611 E23.73720 ; fill
G1 X92.775 Y108.879 E24.04489 ; fill
G1 X93.248 Y108.879 E24.06440 ; fill
G1 X98.351 Y103.775 E24.36247 ; fill
G1 X98.701 Y103.898 E24.37779 ; fill
G1 X93.720 Y108.879 E24.66872 ; fill
G1 X94.192 Y108.879 E24.68823 ; fill
G1 X99.063 Y104.008 E24.97273 ; fill
G1 X99.469 Y104.075 E24.98971 ; fill
G1 X94.665 Y108.879 E25.27030 ; fill
G1 X95.137 Y108.879 E25.28982 ; fill
G1 X99.899 Y104.117 E25.56794 ; fill
G1 X100.401 Y104.087 E25.58870 ; fill
G1 X95.610 Y108.879 E25.86855 ; fill
G1 X96.082 Y108.879 E25.88806 ; fill
G1 X100.960 Y104.001 E26.17298 ; fill
G1 X101.668 Y103.765 E26.20378 ; fill
G1 X96.555 Y108.879 E26.50243 ; fill
G1 X91.121 Y102.500 F4800.000 ; move to first fill point
G1 X102.500 Y91.121 E27.16706 F2574.218 ; fill
G1 X102.028 Y91.121 E27.18657 ; fill
G1 X91.121 Y102.028 E27.82361 ; fill
G1 X91.121 Y101.555 E27.84312 ; fill
G1 X101.555 Y91.121 E28.45256 ; fill
G1 X101.083 Y91.121 E28.47208 ; fill
G1 X91.121 Y101.083 E29.05392 ; fill
G1 X91.121 Y100.611 E29.07344 ; fill
G1 X100.611 Y91.121 E29.62769 ; fill
G1 X100.138 Y91.121 E29.64720 ; fill
G1 X91.121 Y100.138 E30.17386 ; fill
G1 X91.121 Y99.666 E30.19337 ; fill
G1 X99.666 Y91.121 E30.69243 ; fill
G1 X99.193 Y91.121 E30.71194 ; fill
G1 X91.121 Y99.193 E31.18340 ; fill
G1 X91.121 Y98.721 E31.20292 ; fill
G1 X98.721 Y91.121 E31.64679 ; fill
G1 X98.248 Y91.121 E31.66630 ; fill
G1 X91.121 Y98.248 E32.08257 ; fill
G1 X91.121 Y97.776 E32.10208 ; fill
G1 X97.776 Y91.121 E32.49076 ; fill
G1 X97.303 Y91.121 E32.51027 ; fill
G1 X91.121 Y97.303 E32.87135 ; fill
G1 X91.121 Y96.831 E32.89087 ; fill
G1 X96.831 Y91.121 E33.22435 ; fill
G1 X96.358 Y91.121 E33.24386 ; fill
G1 X91.121 Y96.358 E33.54975 ; fill
G1 X91.121 Y95.886 E33.56927 ; fill
G1 X95.886 Y91.121 E33.84756 ; fill
G1 X95.414 Y91.121 E33.86707 ; fill
G1 X91.121 Y95.414 E34.11777 ; fill
G1 X91.121 Y94.941 E34.13728 ; fill
G1 X94.941 Y91.121 E34.36039 ; fill
G1 X94.469 Y91.121 E34.37990 ; fill
G1 X91.121 Y94.469 E34.57541 ; fill
G1 X91.121 Y93.996 E34.59492 ; fill
G1 X93.996 Y91.121 E34.76283 ; fill
G1 X93.524 Y91.121 E34.78234 ; fill
G1 X91.121 Y93.524 E34.92266 ; fill
G1 X91.121 Y93.051 E34.94217 ; fill
G1 X93.051 Y91.121 E35.05489 ; fill
G1 X92.579 Y91.121 E35.07440 ; fill
G1 X91.121 Y92.579 E35.15953 ; fill
G1 X91.121 Y92.106 E35.17904 ; fill
G1 X92.106 Y91.121 E35.23657 ; fill
G1 X91.634 Y91.121 E35.25608 ; fill
G1 X91.121 Y91.634 E35.28601 ; fill
G1 X91.121 Y91.161 E35.30553 ; fill
G1 X91.161 Y91.121 E35.30786 ; fill
G1 F1800.000 E34.30786 ; retract
G92 E0 ; reset extrusion distance
G1 Z2.100 F4800.000 ; move to next layer (6)
G1 X97.254 Y97.254 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X97.842 Y96.771 E1.03413 F1310.976 ; perimeter
G1 X98.514 Y96.412 E1.06826 ; perimeter
G1 X99.242 Y96.191 E1.10239 ; perimeter
G1 X100.000 Y96.116 E1.13651 ; perimeter
G1 X100.106 Y96.127 E1.14127 ; perimeter
G1 X100.758 Y96.191 E1.17064 F1310.976 ; perimeter
G1 X101.486 Y96.412 E1.20477 ; perimeter
G1 X102.158 Y96.771 E1.23890 ; perimeter
G1 X102.746 Y97.254 E1.27303 ; perimeter
G1 X103.229 Y97.842 E1.30715 ; perimeter
G1 X103.588 Y98.514 E1.34128 ; perimeter
G1 X103.809 Y99.242 E1.37541 ; perimeter
G1 X103.884 Y100.000 E1.40954 ; perimeter
G1 X103.809 Y100.758 E1.44367 ; perimeter
G1 X103.588 Y101.486 E1.47780 ; perimeter
G1 X103.229 Y102.158 E1.51192 ; perimeter
G1 X102.746 Y102.746 E1.54605 ; perimeter
G1 X102.158 Y103.229 E1.58018 ; perimeter
G1 X101.486 Y103.588 E1.61431 ; perimeter
G1 X100.758 Y103.809 E1.64844 ; perimeter
G1 X100.000 Y103.884 E1.68257 ; perimeter
G1 X99.242 Y103.809 E1.71669 ; perimeter
G1 X98.514 Y103.588 E1.75082 ; perimeter
G1 X97.842 Y103.229 E1.78495 ; perimeter
G1 X97.254 Y102.746 E1.81908 ; perimeter
G1 X96.771 Y102.158 E1.85321 ; perimeter
G1 X96.412 Y101.486 E1.88733 ; perimeter
G1 X96.381 Y101.385 E1.89210 ; perimeter
G1 X96.191 Y100.758 E1.92146 ; perimeter
G1 X96.116 Y100.000 E1.95559 ; perimeter
G1 X96.191 Y99.242 E1.98972 ; perimeter
G1 X96.412 Y98.514 E2.02385 ; perimeter
G1 X96.771 Y97.842 E2.05798 ; perimeter
G1 X97.206 Y97.312 E2.08874 ; perimeter
G1 X97.484 Y97.540 F4800.000 ; move to first perimeter point
G1 X98.043 Y97.071 E2.12144 F1310.976 ; perimeter
G1 X98.652 Y96.746 E2.15239 ; perimeter
G1 X99.313 Y96.545 E2.18335 ; perimeter
G1 X99.383 Y96.538 E2.18652 ; perimeter
G1 X100.000 Y96.478 E2.21430 F1310.976 ; perimeter
G1 X100.687 Y96.545 E2.24526 ; perimeter
G1 X101.348 Y96.746 E2.27621 ; perimeter
G1 X101.957 Y97.071 E2.30717 ; perimeter
G1 X102.491 Y97.509 E2.33812 ; perimeter
G1 X102.929 Y98.043 E2.36908 ; perimeter
G1 X103.254 Y98.652 E2.40003 ; perimeter
G1 X103.455 Y99.313 E2.43099 ; perimeter
G1 X103.522 Y100.000 E2.46194 ; perimeter
G1 X103.455 Y100.687 E2.49289 ; perimeter
G1 X103.254 Y101.348 E2.52385 ; perimeter
G1 X102.929 Y101.957 E2.55480 ; perimeter
G1 X102.491 Y102.491 E2.58576 ; perimeter
G1 X101.957 Y102.929 E2.61671 ; perimeter
G1 X101.348 Y103.254 E2.64767 ; perimeter
G1 X100.687 Y103.455 E2.67862 ; perimeter
G1 X100.000 Y103.522 E2.70958 ; perimeter
G1 X99.313 Y103.455 E2.74053 ; perimeter
G1 X98.652 Y103.254 E2.77149 ; perimeter
G1 X98.043 Y102.929 E2.80244 ; perimeter
G1 X97.509 Y102.491 E2.83339 ; perimeter
G1 X97.071 Y101.957 E2.86435 ; perimeter
G1 X96.746 Y101.348 E2.89530 ; perimeter
G1 X96.545 Y100.687 E2.92626 ; perimeter
G1 X96.478 Y100.000 E2.95721 ; perimeter
G1 X96.545 Y99.313 E2.98817 ; perimeter
G1 X96.746 Y98.652 E3.01912 ; perimeter
G1 X97.071 Y98.043 E3.05008 ; perimeter
G1 X97.437 Y97.598 E3.07589 ; perimeter
G1 X97.714 Y97.826 F4800.000 ; move to first perimeter point
G1 X97.765 Y97.765 E3.07944 F1179.878 ; perimeter
G1 X98.244 Y97.371 E3.10722 ; perimeter
G1 X98.790 Y97.079 E3.13501 ; perimeter
G1 X99.383 Y96.899 E3.16279 ; perimeter
G1 X100.035 Y96.842 E3.19213 ; perimeter
G1 X100.617 Y96.899 E3.21832 F1179.878 ; perimeter
G1 X101.210 Y97.079 E3.24610 ; perimeter
G1 X101.756 Y97.371 E3.27388 ; perimeter
G1 X102.235 Y97.765 E3.30166 ; perimeter
G1 X102.629 Y98.244 E3.32944 ; perimeter
G1 X102.921 Y98.790 E3.35722 ; perimeter
G1 X103.101 Y99.383 E3.38500 ; perimeter
G1 X103.161 Y100.000 E3.41278 ; perimeter
G1 X103.101 Y100.617 E3.44057 ; perimeter
G1 X102.921 Y101.210 E3.46835 ; perimeter
G1 X102.629 Y101.756 E3.49613 ; perimeter
G1 X102.235 Y102.235 E3.52391 ; perimeter
G1 X101.756 Y102.629 E3.55169 ; perimeter
G1 X101.210 Y102.921 E3.57947 ; perimeter
G1 X100.617 Y103.101 E3.60725 ; perimeter
G1 X100.000 Y103.161 E3.63503 ; perimeter
G1 X99.383 Y103.101 E3.66281 ; perimeter
G1 X98.790 Y102.921 E3.69059 ; perimeter
G1 X98.244 Y102.629 E3.71837 ; perimeter
G1 X97.765 Y102.235 E3.74615 ; perimeter
G1 X97.371 Y101.756 E3.77393 ; perimeter
G1 X97.069 Y101.176 E3.80327 ; perimeter
G1 X96.899 Y100.617 E3.82947 ; perimeter
G1 X96.839 Y100.000 E3.85725 ; perimeter
G1 X96.899 Y99.383 E3.88503 ; perimeter
G1 X97.079 Y98.790 E3.91281 ; perimeter
G1 X97.371 Y98.244 E3.94059 ; perimeter
G1 X97.667 Y97.884 E3.96146 ; perimeter
G1 F1800.000 E2.96146 ; retract
G92 E0 ; reset extrusion distance
G1 X100.243 Y96.387 F4800.000 ; move inwards before travel
G1 X109.121 Y100.807 F4800.000 ; move to first perimeter point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X109.121 Y109.121 E1.37269 F1310.976 ; perimeter
G1 X90.879 Y109.121 E2.19041 F1310.976 ; perimeter
G1 X90.879 Y90.879 E3.00814 ; perimeter
G1 X109.121 Y90.879 E3.82586 ; perimeter
G1 X109.121 Y100.732 E4.26754 ; perimeter
G1 X109.480 Y100.732 F4800.000 ; move to first perimeter point
G1 X109.480 Y109.480 E4.65970 F1310.976 ; perimeter
G1 X90.520 Y109.480 E5.50965 ; perimeter
G1 X90.520 Y90.520 E6.35959 ; perimeter
G1 X109.480 Y90.520 E7.20954 F1310.976 ; perimeter
G1 X109.480 Y100.657 E7.66397 ; perimeter
G1 X109.840 Y100.657 F4800.000 ; move to first perimeter point
G1 X109.840 Y109.840 E8.07560 F1179.878 ; perimeter
G1 X90.160 Y109.840 E8.95777 F1179.878 ; perimeter
G1 X90.160 Y90.160 E9.83995 ; perimeter
G1 X109.840 Y90.160 E10.72212 ; perimeter
G1 X109.840 Y100.582 E11.18929 ; perimeter
G1 F1800.000 E10.18929 ; retract
G92 E0 ; reset extrusion distance
G1 X109.406 Y109.590 F4800.000 ; move inwards before travel
G1 X104.068 Y99.406 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X108.879 Y104.216 E1.55531 F1638.720 ; fill
G1 X108.879 Y105.149 E1.63143 ; fill
G1 X104.091 Y100.361 E2.18410 ; fill
G1 X103.944 Y101.147 E2.24931 ; fill
G1 X108.879 Y106.081 E2.81898 ; fill
G1 X108.879 Y107.014 E2.89510 ; fill
G1 X103.684 Y101.819 E3.49475 ; fill
G1 X103.338 Y102.406 E3.55033 ; fill
G1 X108.879 Y107.946 E4.18991 ; fill
G1 X108.859 Y108.859 E4.26442 ; fill
G1 X102.918 Y102.918 E4.95021 ; fill
G1 X102.406 Y103.338 E5.00430 ; fill
G1 X107.946 Y108.879 E5.64387 ; fill
G1 X107.014 Y108.879 E5.71999 ; fill
G1 X101.819 Y103.684 E6.31964 ; fill
G1 X101.147 Y103.944 E6.37851 ; fill
G1 X106.081 Y108.879 E6.94818 ; fill
G1 X105.149 Y108.879 E7.02430 ; fill
G1 X100.361 Y104.091 E7.57697 ; fill
G1 X99.406 Y104.068 E7.65498 ; fill
G1 X104.216 Y108.879 E8.21029 ; fill
G1 X103.284 Y108.879 E8.28641 ; fill
G1 X97.985 Y103.580 E8.89812 ; fill
G1 F1800.000 E7.89812 ; retract
G92 E0 ; reset extrusion distance
G1 X96.420 Y102.015 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X91.121 Y96.716 E1.61171 F1638.720 ; fill
G1 X91.121 Y95.784 E1.68783 ; fill
G1 X95.932 Y100.594 E2.24314 ; fill
G1 X95.909 Y99.639 E2.32115 ; fill
G1 X91.121 Y94.851 E2.87382 ; fill
G1 X91.121 Y93.919 E2.94994 ; fill
G1 X96.056 Y98.853 E3.51961 ; fill
G1 X96.316 Y98.181 E3.57848 ; fill
G1 X91.121 Y92.986 E4.17813 ; fill
G1 X91.121 Y92.054 E4.25425 ; fill
G1 X96.662 Y97.594 E4.89382 ; fill
G1 X97.082 Y97.082 E4.94791 ; fill
G1 X91.141 Y91.141 E5.63370 ; fill
G1 X92.054 Y91.121 E5.70821 ; fill
G1 X97.594 Y96.662 E6.34779 ; fill
G1 X98.181 Y96.316 E6.40337 ; fill
G1 X92.986 Y91.121 E7.00302 ; fill
G1 X93.919 Y91.121 E7.07914 ; fill
G1 X98.853 Y96.056 E7.64881 ; fill
G1 X99.639 Y95.909 E7.71402 ; fill
G1 X94.851 Y91.121 E8.26669 ; fill
G1 X95.784 Y91.121 E8.34281 ; fill
G1 X100.594 Y95.932 E8.89812 ; fill
G1 X102.015 Y96.420 F4800.000 ; move to first fill point
G1 X96.716 Y91.121 E9.50983 F1638.720 ; fill
G1 F1800.000 E8.50983 ; retract
G92 E0 ; reset extrusion distance
G1 X91.121 Y97.649 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X102.351 Y108.879 E2.29643 F1638.720 ; fill
G1 X101.419 Y108.879 E2.37255 ; fill
G1 X91.121 Y98.581 E3.56132 ; fill
G1 X91.121 Y99.514 E3.63744 ; fill
G1 X100.486 Y108.879 E4.71857 ; fill
G1 X99.554 Y108.879 E4.79469 ; fill
G1 X91.121 Y100.446 E5.76816 ; fill
G1 X91.121 Y101.379 E5.84428 ; fill
G1 X98.621 Y108.879 E6.71011 ; fill
G1 X97.689 Y108.879 E6.78623 ; fill
G1 X91.121 Y102.311 E7.54440 ; fill
G1 X91.121 Y103.244 E7.62052 ; fill
G1 X96.756 Y108.879 E8.27104 ; fill
G1 X95.824 Y108.879 E8.34716 ; fill
G1 X91.121 Y104.176 E8.89004 ; fill
G1 X91.121 Y105.109 E8.96616 ; fill
G1 X94.891 Y108.879 E9.40138 ; fill
G1 X93.959 Y108.879 E9.47750 ; fill
G1 X91.121 Y106.041 E9.80507 ; fill
G1 X91.121 Y106.974 E9.88119 ; fill
G1 X93.026 Y108.879 E10.10111 ; fill
G1 X92.094 Y108.879 E10.17723 ; fill
G1 X91.121 Y107.906 E10.28950 ; fill
G1 X91.121 Y108.839 E10.36562 ; fill
G1 X91.161 Y108.879 E10.37024 ; fill
G1 F1800.000 E9.37024 ; retract
G92 E0 ; reset extrusion distance
G1 X103.580 Y97.985 F4800.000 ; move to first fill point
G1 E1.00000 F1800.000 ; compensate retraction
G1 X108.879 Y103.284 E1.61171 F1638.720 ; fill
G1 X108.879 Y102.351 E1.68783 ; fill
G1 X97.649 Y91.121 E2.98426 ; fill
G1 X98.581 Y91.121 E3.06038 ; fill
G1 X108.879 Y101.419 E4.24915 ; fill
G1 X108.879 Y100.486 E4.32527 ; fill
G1 X99.514 Y91.121 E5.40640 ; fill
G1 X100.446 Y91.121 E5.48252 ; fill
G1 X108.879 Y99.554 E6.45599 ; fill
G1 X108.879 Y98.621 E6.53211 ; fill
G1 X101.379 Y91.121 E7.39794 ; fill
G1 X102.311 Y91.121 E7.47406 ; fill
G1 X108.879 Y97.689 E8.23223 ; fill
G1 X108.879 Y96.756 E8.30835 ; fill
G1 X103.244 Y91.121 E8.95888 ; fill
G1 X104.176 Y91.121 E9.03500 ; fill
G1 X108.879 Y95.824 E9.57787 ; fill
G1 X108.879 Y94.891 E9.65399 ; fill
G1 X105.109 Y91.121 E10.08921 ; fill
G1 X106.041 Y91.121 E10.16533 ; fill
G1 X108.879 Y93.959 E10.49290 ; fill
G1 X108.879 Y93.026 E10.56902 ; fill
G1 X106.974 Y91.121 E10.78894 ; fill
G1 X107.906 Y91.121 E10.86506 ; fill
G1 X108.879 Y92.094 E10.97733 ; fill
G1 X108.879 Y91.161 E11.05345 ; fill
G1 X108.839 Y91.121 E11.05807 ; fill
G1 F1800.000 E10.05807 ; retract
G92 E0 ; reset extrusion distance
M107 ; disable fan
M104 S0 ; turn off temperature
G28 X0  ; home X axis
M84     ; disable motors

; filament used = 348.2mm (0.8cm3)

; avoid_crossing_perimeters = 0
; bed_size = 200,200
; bed_temperature = 105
; bridge_acceleration = 0
; bridge_fan_speed = 30
; bridge_flow_ratio = 1
; brim_width = 0
; complete_objects = 0
; cooling = 1
; default_acceleration = 0
; disable_fan_first_layers = 3
; duplicate_distance = 6
; end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
; external_perimeters_first = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 20
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; fan_always_on = 0
; fan_below_layer_time = 60
; filament_diameter = 1.75
; first_layer_acceleration = 0
; first_layer_bed_temperature = 105
; first_layer_extrusion_width = 210%
; first_layer_speed = 30%
; first_layer_temperature = 250
; g0 = 0
; gcode_arcs = 0
; gcode_comments = 1
; gcode_flavor = reprap
; infill_acceleration = 0
; infill_first = 0
; layer_gcode = 
; max_fan_speed = 100
; min_fan_speed = 35
; min_print_speed = 10
; min_skirt_length = 0
; notes = 
; nozzle_diameter = 0.5
; only_retract_when_crossing_perimeters = 1
; ooze_prevention = 0
; output_filename_format = [input_filename_base]_detail.gcode
; perimeter_acceleration = 0
; post_process = 
; print_center = 100,100
; resolution = 0
; retract_before_travel = 2
; retract_layer_change = 1
; retract_length = 1
; retract_length_toolchange = 10
; retract_lift = 0
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 30
; skirt_distance = 4
; skirt_height = 1
; skirts = 1
; slowdown_below_layer_time = 30
; spiral_vase = 0
; standby_temperature_delta = -5
; start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
; temperature = 250
; threads = 2
; toolchange_gcode = 
; travel_speed = 80
; use_firmware_retraction = 0
; use_relative_e_distances = 0
; vibration_limit = 0
; wipe = 0
; z_offset = 0
; dont_support_bridges = 1
; extrusion_width = 0
; first_layer_height = 0.3
; infill_only_where_needed = 0
; interface_shells = 0
; layer_height = 0.3
; raft_layers = 0
; seam_position = random
; support_material = 0
; support_material_angle = 0
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0
; support_material_interface_extruder = 1
; support_material_interface_layers = 5
; support_material_interface_spacing = 0
; support_material_interface_speed = 60
; support_material_pattern = rectilinear
; support_material_spacing = 2.5
; support_material_speed = 60
; support_material_threshold = 45
; bottom_solid_layers = 5
; bridge_speed = 60
; external_perimeter_speed = 90%
; extra_perimeters = 1
; fill_angle = 45
; fill_density = 40%
; fill_pattern = honeycomb
; gap_fill_speed = 20
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 110%
; infill_speed = 60
; overhangs = 1
; perimeter_extruder = 1
; perimeter_extrusion_width = 107%
; perimeter_speed = 40
; perimeters = 3
; small_perimeter_speed = 40
; solid_fill_pattern = rectilinear
; solid_infill_below_area = 70
; solid_infill_every_layers = 0
; solid_infill_extrusion_width = 95%
; solid_infill_speed = 60
; thin_walls = 1
; top_infill_extrusion_width = 0
; top_solid_infill_speed = 50
; top_solid_layers = 3